foo

joined 2 years ago
[–] foo@withachanceof.com 21 points 2 years ago* (last edited 2 years ago) (4 children)

What is up with you and Taylor Swift conspiracy theories today?

[–] foo@withachanceof.com 4 points 2 years ago

I use Grub for my bootloader so I'm probably not the best person to ask for rEFind problems, but a good place to start for everything Arch related is the wiki. The page for rEFInd has a configuration section that outlines where the config files are and how to read them. Check that everything there matches what you expect it to be: https://wiki.archlinux.org/title/REFInd#Configuration.

If you've verified that your bootloader config is correct and it's installed on the drive you're booting from correctly another config to check is /etc/fstab to ensure you have a root device set in there too. The wiki is your friend here too: https://wiki.archlinux.org/title/Fstab

[–] foo@withachanceof.com 4 points 2 years ago* (last edited 2 years ago) (4 children)

You'll need to post more info about your bootloader/fstab config. The error ERROR: device ' ' not found implies there's something set to an empty string.

[–] foo@withachanceof.com 8 points 2 years ago* (last edited 2 years ago)

Works for me with Lemmy-UI. I'm guessing whatever client/browser you're using is including the period at the end of the sentence in the URL.

[–] foo@withachanceof.com 52 points 2 years ago* (last edited 2 years ago) (4 children)

I suppose you could argue an "illegal number" is: https://en.wikipedia.org/wiki/Illegal_number.

For example, the HD DVD encryption key saga was originally fought via DMCA notices to Digg: https://en.wikipedia.org/wiki/AACS_encryption_key_controversy

[–] foo@withachanceof.com 15 points 2 years ago* (last edited 2 years ago)

The only real answer here is talk to an actual lawyer rather than a bunch of Joe Blows on the internet. Case in point: Laws will vary depending on country and you haven't specified what country you're in. The set of laws you're subject to are possibly entirely different than the set of laws each commenter here is familiar with. Never take legal advice from the internet.

But if you're only looking to publish the source code as a resume item, it's not worth the legal exposure or time/money to talk to a lawyer. Find something else to write and put on your resume.

[–] foo@withachanceof.com 106 points 2 years ago (4 children)

Non-snarky answer: My guess is that after not answering any questions they'd assume you're just trying to waste their time and tell you to leave or actually be arrested for trespassing.

[–] foo@withachanceof.com 8 points 2 years ago (1 children)

!fishing@lemmy.world looks like the biggest per https://lemmyverse.net/communities?query=fishing, but there's also not many recent posts.

[–] foo@withachanceof.com 22 points 2 years ago

If you're not overweight and simply want to become more athletic I personally think the most important thing to do is to find an activity you enjoy. That's something you have to discover for yourself.

For example, I can't stand working out for the sake of working out at a gym. But I do get really motivated by climbing, hiking, trail running, and skiing. Climbing builds strength and has a certain level of problem solving involved too so it's mentally stimulating. Hiking and trail running are excellent cardio and have clearly defined goals to reach a certain summit or some endpoint. And skiing is just a blast in all forms. All of that keeps me active and having fun while I'm doing it. That makes me want to do it more which allows me to set bigger objectives and then it builds on itself.

 

I have a new-to-me 2010 F250 that I use for driving forest roads in the PNW often to get to trailheads. Due to all the rain (and general lack of maintenance funding) our forest roads here are in pretty bad shape with many pot holes and rocky sections. I'm not looking to do any serious off-roading, just drive rough forest roads with confidence.

So far I'm planning on getting better off-road tires since that's low hanging fruit. Beyond that, I was wondering about a limited slip differential? I've definitely had a few times where the open diff would result in one wheel spinning when the other still had good traction. I'm not sure how difficult/expensive that would be, but would it be worth it?

Aside from that, are there any suspension mods to help with the many pot holes maybe? Anything else to consider?

 

A few weeks ago I posted here asking about buying a first hand plane and if it was worth dropping ~$400 on a Lie-Nielsen one.

After all of your comments about getting an old Stanley I kept an eye on Craigslist, Ebay, and FB Marketplace for a little bit and ended up finding someone selling a collection of pre-WWII Stanley planes about an hour north of me. Including, specifically, a 4-1/2 and a 5-1/2 which was exactly what I wanted.

Knowing that the 1/2 sizes were less common than the round numbers and since the guy was local I jumped on it and ended up buying both for $40/each. The linked to album is the before and after of the 5-1/2 after cleaning it up. It's all tuned up and works beautifully. All in, I'm at $80 for two planes, $15 for cleaning materials, and $35 for a whetstone sharpening kit; way cheaper than a new Lie-Nielsen and I got two planes! Thanks everyone!

https://imgur.com/a/AoABAsI

 

I’m working on a project with a 19x26" panel that I realized after gluing still has a bit of a twist in it across the three boards. In the past I’ve simply sanded down panels, but I think this one is going to require a plane. Thing is, I’m still fairly new to woodworking and don’t have any planes yet so I’ve been doing my homework on which to get.

I generally avoid buying junk tools, especially Chinese junk so that rules out a bunch of the options. Plus, I assume I’d find it difficult to tune up an old one since I’m not knowledgeable enough about them yet. Because of that I’ve ended up going straight to the top and considering either Lee Valley or Lie-Nielsen.

Given that my immediate task is to flatten a panel I was thinking either a #5 or #5-1/2 high angle jack plane knowing that I’d likely expand the collection in the future with a smoother as well, but for now I’m only looking for a first one.

Does that make sense for me? If so, any tips on deciding between the #5 and #5-1/2? The #5 is a bit cheaper, but it seems like the slightly bigger #5-1/2 would be good if I followed it up with a #4 in the future. Specifically I’ve been looking at:

89
submitted 2 years ago* (last edited 2 years ago) by foo@withachanceof.com to c/unixsocks@lemmy.blahaj.zone
 
view more: next ›