None of them look very practical. There's lots of plexiglass that will get scratched up the first time you clean it and a major lack of drive bays.
cmnybo
joined 2 years ago
DC pass through is only needed if you're powering something over the coax like a pre amp or a remote coax switch.
LTO tape is good for 30 years when properly stored. You should be transferring the data to a newer format much sooner than that anyways. LTO drives are only backwards compatible for 1 or 2 versions, so you probably won't be able to find a working drive that can read your tape 30 years later.
I've never had to defragment the ext4 drives in my server. Ext4 is fairly resistant to fragmentation.
Solar panels are already quite cheap. What we need is much cheaper grid forming inverters so we can stop destabilizing the grid with solar.
It looks like it has a very limited number of media formats that are supported. A small SBC like a Raspberry Pi Zero 2W or one of the low end Orange Pi boards would be much more useful since there wouldn't be any restrictions on what could be served.
The card is rated for 180 watts. It has a single 8 pin power connector, which means the maximum it could possibly draw is 225W. Pick a power supply that will provide that plus whatever the rest of the computer draws. I would suggest oversizing the power supply a bit so you don't use more than about 75% of it's rated output.
I haven't had any issues with my RX 6700 XT. It works great for games and CAD. I've never gotten the video encoding working though. I think it needs the proprietary drivers.
My newest PC only supports PCIe 3.0. My SSDs are still plenty fast, at least until they start thermal throttling.
When I used dial-up, local calls were free.
Normal DVDs are not good for archival. Cheap ones can degrade in less than 10 years. You want to get the M-disc ones for long term storage.