Looks like 2x 4 pin fan headers:
But yeah I've got an AliExpress X99 board, which threw all sorts of hardware errors, had no fan speed control (100% all the time), no working hwmon sensors, and I ended up buying a used Supermicro board instead.
SteveTech
joined 2 years ago
You can go through the activation troubleshooter and say you replaced the motherboard, I did this with my brother's computer and used a licence from a 5 year old netbook on a modern desktop. It might've needed a Microsoft account though.
Will I see any performance increase?
Like others have said LLMs mostly use VRAM, they can use system RAM if you're running them on CPU, but that's ridiculously slow.
It will however increase the speed of your compile times, which is especially useful if you're compiling something large like the Linux kernel on a regular basis.
I'm also worried about not having ECC RAM.
If you are using it purely for LLMs, if it's going to get bit flips, it'll happen in VRAM.
If you are compiling large things for customers, I'd recommend ECC, just in case, e.g. you don't want a bricking firmware from a bit flip. But according to EDAC and my TIG stack, my server's ECC RAM has never even detected an error in the past year, if I understand EDAC properly, so it's really not important.
I jailbroke my 4th gen iPod a few months after Apple dropped support for it, I feel like that breathed a lot more life into it.
AFAIK fast startup only affects shutdown, clicking restart will always do a full reboot. Shift clicking shutdown will do a full shutdown like you said, but shift clicking restart will start recovery mode.
My understanding after reading the article is: while roaming your phone sets up a VPN type thing with your phone provider, and routes calls and data through this tunnel, so now Europol has to deal with another country if they want to track you.
You might be able to flash the retail BIOS to remove the OEM stuff, but often if it's running a specific OEM BIOS it'll block you from flashing a retail version.
If the HOA's router supports UPnP/NAT-PMP/PCP then you might be able to use that to get some ports forwarded.
Haha yeah, I sell these at work and recognised it immediately! It's literally just the inner part you solder the wires onto, without the outer casing.
I tried to find a photo, but I struggled:
I believe I've actually had this happen with actual VLC, I think I just hit pause and then play and it was fixed. So maybe pause it for half a second after your seek.
I've got an interesting setup I'd like to share:
So I've got a Raspberry Pi with 4 RTL-SDRs, 2 for TV, 1 for radio, and 1 for plane transponders. That runs SatPi for the 2 TV SDRs, which TVHeadend running on my main server connects to, to record and stream. Jellyfin also connects to TVHeadend to properly index everything and for easy access to recordings and live TV.