Starfighter

joined 2 years ago
[–] Starfighter@discuss.tchncs.de 3 points 1 week ago* (last edited 1 week ago)

I'm not entirely convinced that this engine will ever work but there is only one way to know for sure.

Very excited to see that this engine will get its chance to prove itself.

[–] Starfighter@discuss.tchncs.de 12 points 1 week ago* (last edited 1 week ago)

How well NixOS fits your purpose really depends on what you want to do with the OS. If you're just going run a bunch of docker containers, you could manage them via Nix but its a little cumbersome.

Where NixOS really shines for small servers are the so called NixOS Options. They allow you to install tons of services on bare metal but manage all the configuration for you. E.g. open the correct firewalls ports, run a dedicated DB or cache, etc. and all those simply require you to enable them with an ... = true;.

Smaller projects might not have a NixOS Option available and some options are more and/or easier configurable than others, but if you're running just a few common services you could feasibly manage your whole server with just one native config file and no docker shenanigans.

I'd recommend checking what's available under the link above. If you wanna go the container route instead, you have the option of just using docker non-declaratively as on every other distro (but then you lose some of the benefits NixOS gives you), or you can declaratively have NixOS manage all the docker containers. There are a few ways to do and manage this so some further research will be required.

[–] Starfighter@discuss.tchncs.de 6 points 2 weeks ago* (last edited 2 weeks ago) (1 children)

I know this is a meme but would that actually help a rocket engine?

They do water injection on some bomber engines and the harrier jump jet, which allows them to run even more fuel through the engine(s).

On a rocket engine this would only make sense inside the combustion chamber, not the nozzle?

Does flash boiling water in the nozzle add enough pressure to overcome the pressure reduction from cooling down the exhaust gasses?

[–] Starfighter@discuss.tchncs.de 5 points 2 weeks ago* (last edited 2 weeks ago)

Not an expert. This has been done quite successfully for space applications. Granted they are only required to roll out once but they have to do so with near perfect reliability. There are quite a few makes and models but I'll reference the ones currently mounted on the ISS (ROSA made by Redwire) because you've probably seen pictures of them.

Their patent states that they use polymeric sheets or fiberglass meshes as a backing material.

Here they are in their packed up state:

And unpacked (the brownish "smaller" panels on the right, note that they are still longer than entire human modules):

Then helmfile might be worth checking out

[–] Starfighter@discuss.tchncs.de 1 points 1 month ago* (last edited 1 month ago) (1 children)

Mir ist immer ein Niederschlagsgraph wichtig.

Die open-meteo Modelle sind für meine Planung für die nächsten paar Tage zuverlässig genug. Die benutzen meines Wissens nach Europaweite Modelle, sollten also auch grenzübergreifend vergleichbar gut funktionieren.

Es gibt ne Menge Open-Source Wetter Apps im F-Droid store die auf open-meteo zurückgreifen, zB:

Bura

Overmorrow (Izzysoft Repo)

[–] Starfighter@discuss.tchncs.de 5 points 1 month ago (1 children)

Love the Sendy Club Camaro. The aero-hood design is such a great combination of form and function.

[–] Starfighter@discuss.tchncs.de 3 points 1 month ago* (last edited 1 month ago) (1 children)

again.

On a serious note: space is hard and I wish them the best of luck for their next attempt.

[–] Starfighter@discuss.tchncs.de 38 points 1 month ago* (last edited 1 month ago)

You dont need to manually handle the WG config files. This isn't really an issue when it's just you and your two devices, but once you start supporting more people, like non-technical family members, this gets really annoying really quickly.

Tailscale (and headscale) just require you to log in, which even those family members can manage and then does the rest for you. They also support SSO in which case you wouldn't even have to create new accounts.

[–] Starfighter@discuss.tchncs.de 3 points 1 month ago (1 children)

The steam page has a demo that features the full game but has saving disabled.

Highly recommend taking that for a quick ring-dive.

[–] Starfighter@discuss.tchncs.de 5 points 1 month ago (3 children)

Thanks for that handy search result link.

Really makes me want to play Rings of Saturn again :)

 

Hi, this post is structured similarly to r/PrintedCircuitBoard 's review request format. Since we don't have any PCB communities over here yet, I thought that this might fit in here and can maybe spark some friendly discussion.

This is a relay board controlling electrically driven windows and blinds. For this purpose it has some additional connectors to a weather station, interior sensors and an LCD screen.

It is replacing a ~20 year old board that has started to develop some annoying quirks. I've mostly copied what the original board did and adjusted it for the ESP32. This is not a production board and if all goes well, I will only ever assemble a single one of these.

The primary usage scenario is that the MCU will monitor the weather station and then actuate the motor groups (M1 - M6 connected on J3 - J8) to keep the indoors temperature and humidity in check.

At least during summer time the board will likely run 24/7 and will hopefully be used for a number of years. For maintenance reasons I've tried to keep it simple and the component count low.

Mains power is supplied from J1 and being fed to the motors via the relays. PS1 converts the line voltage to +5V DC for the relay coils and some auxiliary components. The switching regulator U2 steps that down to +3.3V for the MCU U1 and IO Expander U3.

The board size is mostly constrained by the preexisting mounting holes which gives me plenty of space to work with even with just a 2 layer board. The enclosure containing the mounts is installed indoors and is finger-pokey-tight.

Jumper JP1 allows me to supply the MCU devkit daughter board with +5V, should I ever replace it with a different one. Similarly J11 exists for future expansion.

J10 mounts another daughter board (not included in review) facilitating communications with the weather station. Should the station ever need to be replaced I can swap in a new, matching board.

There aren't any high-speed connections on the board. The fastest one is likely the SPI connection to the LCD controller but I can slow it down in firmware if necessary.

Regarding the DNP components: There are only 5 motors installed at the moment so I will cover the sixth slot with a piece of plastic for now. R1 and R2 will only be populated if the 10k pullup resistors integrated into the MCU are insufficient for typical baud rates.

While it is not the first board I've designed, it is the first one carrying mains power (European grid 230V@50Hz). I'm using 2 oz copper to accommodate the motor currents within reasonably wide traces.

In case anyone is interested, it will be running the ESPHome firmware to easily integrate with the Home-Assistant smart home solution. This also pushes firmware maintenance from me onto the ESPHome devs.

3D render from front (no 3D model for relays K** and MCU board; 3D model for J1 and J2 is a stand-in of same outer dimensions): 3D Front

Orthographic view from front: Orthographic Front

Schematic:

Schematic

PCB All layers (For reference: thickest traces are 2.5 mm / ~98.4 mils; thinnest traces are 0.25 mm / ~9.84 mils): All layers

PCB Front layers excluding Silkscreen: Front layers

PCB Back layers + Front Fab layer: Back layers

view more: next ›