ShadowRam

I've blocked all of feddit.de

I went do https://kbin.social/d/feddit.de

Clicked the block button, my profile shows the domain is blocked,

But I'm still seeing a lot of feddit.de posts in hot.

Is the block domain feature not working anymore?

Terms of Use: I spent hundreds of hours designing and iterating these organizers. All I ask in return is to subscribe to my YouTube and to watch the video where I design these bad boys.https://www.youtube.com/channel/UCaqk58gfGcDKyc1l4IGP_vQ?sub_confirmation=1 OR YOU CAN JUST BUY IT: Adapters for any tool combination are for sale on Amazon:https://amzn.to/3LjpfM6 Credit: For the battery connection I modified this file to make a tight fit, please give them the credit they deserve:https://www.thingiverse.com/thing:4850997 Disclaimer: Please be very careful as adapters can cause damage to your tools and even catch them on fire. There has been no confident safety test conducted in the making of this design. Use at your own risk.

The first 1,000 people to use the link will get a 1 month free trial of Skillshare: https://skl.sh/christopherhelmke07231This is the beginning of a video ser...

I've created this clip from zero because the basic ones I found were too small and my sunglasses fell down every time I was driving. With this one the sunglasses are perfectly placed and stay in place. I am personally using brillenhalter_v2-2_filled of my uploaded versions because it fits the best. The alternative to this one is brillenhalter_v2-1_filled. The other two were designed for larger sunglasses and need more time to print because of their uniqe design. V2-2 Versions got a small bump on the top to hold the glasses better in place, please note that you should take your glasses only when standing still, because you need to hold the clip a little bit, so it doesn't fall down from the sunvisor. Otherwise I can just recommend it. The rear "hole" is for thinner glasses that would easily slip out. Printed for my Audi A5 Cabrio but it fits other sunvisors as well.

This is a remix from https://www.thingiverse.com/thing:3495751 A re-design of Leecarl's Sim Racing Button Box, modified for use with American Truck Simulator / Euro Truck Simulator. I modified the face plate to utilize the switches/buttons I needed. I also included a blank faceplate template for others to start with. I had to remove the letters from the clamp bolt, clamp body, and main body as my printer was having troubles getting them to stick to the bed and not get dragged around into the rest of the print. Additionally, I had to lengthen the clamp so that it would fit on my desk. I have also included a modified back plate that utilizes a single USB Type B port intended for an Arduino to sit on the bottom of the box. For the knobs I used genuine Bendix MV-3 air brake knobs. I have included an .stl for an adapter to allow these 5/8" threaded knobs to be used with a smaller, electric push/pull switch. All credit for the original design belongs to LeecarL (https://www.thingiverse.com/leecarl/designs)

For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle and it takes about 1.5 hours for the set.

T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3 nut. There's also a version that fits to #4-40 x 3/16'' nut:https://www.thingiverse.com/thing:3366563 Fits for most of the printers based on V-Slot, e.g. Creality (CR-10, Ender 3, Ender 5), Tevo (Tarantula, Tornado), Tronxy (X1, X3, X5S) and many more Put it in the profile slot and turn the bolt - it will turn and find its locking position. Check out my other designs:https://www.thingiverse.com/DaVinci2000/designs A decent set of M3 hex bolts and nuts can be found on Banggood:https://www.banggood.com/custlink/KG3vEvGOIp

removed some material to speed up print, still works great. geometry gives enough support. used 2 drywall self taps.

This holder can allocate 8 wide USB sticks, 8 SD cards, and up to 15 MicroSD cards. Ideal for your desk, to keep your portable storage in a single place when you need them. It has holes to prevent from dust accumulation, and reduce a little the material used to print it. * This design is an improvement to USB and SD card holder for wide USB sticks; now including better holding for MicroSD at 60 degrees (almost vertical), while extending space for up to 15 (instead of only 5), and fixed some vector errors.

Here is an adapter to fix common broom in UE. This adapter is designed for 20mm ID stick, and 20mm OD coarse thread (tapered). Can be reinforced as pictured with 4 screws (here: thermoplastic Pozi 3x10) Voici un adaptateur pour réparer un modèle de balai très répandu en Europe. Il est conçu pour s'adapter à un manche de 20mm de diamètre interne et le diametre externe est de 20mm, le filet est large et conique. il est ensuite bloqué par 4 vis comme représenté (ici : vis thermopalstiques Pozi 3x10) Enjoy !