Convoy S21A with P2500 buck driver and KD full spectrum pink 10W 5050 emitter.
Fun little light, but a little off in that the Vf of the emitter is 4V on high but it didn’t play well with the convoy buck/boost driver…. So I went with a buck. Use 2x 18350 to get well regulated performance or 1x 21700 for convenience and runtime but experience voltage sag.
Either way it’s a fun light that throws well for an S21A.
A super user took an emission spectra of one of the LEDs I use. Interesting data for sure!
Weird color? Check
Overkill? Check
Borderline useless? Check
Low skill? Check
Right up my alley.
Pretty straightforward. The driver is glued in, so I used debonder and pushed the driver out by pushing on the top of the driver through the switch hole with some needle nose pliers.
I swapped out the stock emitters in an SP36 for 4 3535 sized pink emitters from KD. The output of the SP36 is pretty well matched to the pink emitters, except turbo won’t be available at a battery voltage of 3.6ish.
Not perfect but still fun. 👍
First Lemmy post. Let’s see how this goes..!
I got some 5050 and 3535 pink emitters from KD
They’re looking like they will be fun to work with..!
I finally got it to work on mobile.
😂
Social media platforms are weird.