Pipster

A remarkably quick and easy project I wanted to get done in a short amount of time. I got to use a piece of purple leather I had been saving. Inside is a single card slot and a bigger space behind it.

Very similar to a wristlet bag I made recently but tiny, I really just wanted to focus on polish and execution for this one rather than trying anything crazy.

Happy with how this one turned out, I love the colours and, whilst I thought the leather I picked was too thick, it is pleasingly chunky and sturdy.

Also gave me an excuse to do my favourite little design accent which is to stitch a different piece of leather on, edge to edge, with that satisfying joining, crisscrossing, stitch (if anyone knows the technical name please let me know, I just made it for a different project, it seems to work and I love the look of it).

A remarkably quick and easy project I wanted to get done in a short amount of time. I got to use a piece of purple leather I had been saving. Inside is a single card slot and a bigger space behind it.

Very similar to the wristlet bag I made recently but tiny, I really just wanted to focus on polish and execution for this one rather than trying anything crazy.

Happy with how this one turned out, I love the colours and, whilst I thought the leather I picked was too thick, it is pleasingly chunky and sturdy.

Also gave me an exuse to do my favourite little design accent which is to stitch a different piece of leather on, edge to edge, with that satisfying joining, crisscrossing, stitch (if anyone knows the technical name please let me know, I just made it for a different project, it seems to work and I love the look of it).

This was a smaller project after my last one, I wanted to make something relatively simple that could have a pouch with some ability to expand. I ended up reworking how I would make the expanding gussets a bunch of times, settled on attaching them to the front section by gluing then turning them in on themselves and stitching the fold, which has kind of worked but not my favourite technique there by a long shot.

I need to get some more, thinner, leather, I'm struggling with the thickness of some of the pieces I have at the moment, this one ended up rather on the chonky side because of it.

As ever, plenty of mistakes but overall still pretty happy with how it came out.

I've had a bit of a hiatus in my leathercrafting recently. I designed this bag back at the end of May and quickly cut out the pieces, attached lining leather etc. then I just stalled for over a month. I got rather disallusioned with my design and the thickness of the leather (especially once lined) and was thinking it just wasn't going to go together properly and wouldn't work. I have a fairly limited number of larger leather panels so I was a bit depressed I had just wasted some.

And so it sat there, cut out but not in any way assembled for over a month. Until the weekend where I finally got some motivation. I had cut my dry spell short the week before by making some little trinkets for a gift (a simple passport cover and a little bookmark) and thought this was the time to get back on this horse too.

Some of my original fears did come to light, I had real issues skiving some of the leather at the join (the front and rear are separare pieces), I need a better skiving tool really and the lining and glue didn't help matters (I should have left a portion unlined). The leather also didn't shape to the gusset I made quite right either, I definitely need to learn how to properly measure for a gusset.

Desipite all those issues I'm actually quite happy with it. The overall shape and design is quite pleasing, the colours worked far better than I thought they would and I like not only the colour contrast but there is a texture difference between the red and blue leathers.

So yeah, really happy I finished this project, it was by far the most longest and most laborious project I've done so far and I've learnt a lot of stuff to apply to future designs.

So I've just become an aunt for the first time and I want to get something for the little man that is something meaningful to actually keep.

Normal presents are covered, I've got them a little keepsake box, practical every day stuff sorted etc. This is something which doesn't have to be now - think of it more like a christening gift but for a child that won't actually be christened.

Now obviously I can think of buying something or commissioning something (handmade blankets etc.) but it seems somewhat a waste to have a skill (or at least be learning one) and not putting it to good use for this kind of occasion.

Is there an item anyone can think of that would make a good gift? Doesn't need to be "useful" necessarily, just something that could be appreciated down the line. My mother thought I could make a something like a passport holder? Open to ideas!

More pics:

So this was the product of a mistake. I had already taken my previous project (https://lemmy.blahaj.zone/post/24039237), measured it and replicated it in LibreCAD for a reproducible pattern and this was my attempt to use that pattern. Problem is that the full length of the strap is longer than a piece of A4 paper so the pattern was split over two pages. Plan was to scratch each half onto my leather and cut it out in one go.

However I got a bit too enthusiastic and accidentally traced and cut the entire thicker section of it out... So rather than abandon it I made the best of the situation and found a contrasting but similar thickness leather and tried my first join! A bit of glue, some accurate stitching chisel placement and they were attached! I was genuinely shocked as to how well it worked, I thought much more material would be needed for that to work that easily, or that I would end up with it looking a mess seeing as the strap holds a lot of tension in it when worn. I'm aware this isn't necessarily the right way of doing the join, I was in a bit of a hurry and just kind of skimmed the instructions (and not very well), I want to try a better, stronger and more decorative stitch next time.

Either way, this is my second iteration of the same design, its fascinating how just changing the material and colour a little changes the vibe of the entire thing. I'm going to keep iterating on the same design, get some snaps in rather than the SB closure, skive down the edges of those retaining bands to reduce the profile of the edge, get some edge bevelling or edge paint involved, try to do some lining etc.

For most of my detailed cutting I've been using generic #11 craft knife blades and it seems the "wear curve" on them is rather aggressive to start with then kind of goes flat.

Like, a new blade goes through leather like butter but that lasts for maybe 4-5 decently sized cuts before it starts needing multiple swipes and then at some point it almost feels like the leather is bumpy or grainy where the blade isn't cutting through denser sections.

I don't want to be too wasteful nor do I want to be forever changing blades - how long do you tend to go between changes?

I had a lot of fun with this one, just made it on the fly. Was originally planning to just make a relatively simple one that I could use to try lining an item but it seemed a waste as the suede side was so soft. Ended up creating this, its a really simple shape and not too difficult to make. Once I start doing some skiving to reduce the thickness where the retaining bands attach and some other embellishments I think this could look really good. I want to make this exact one again but this time in a much darker leather and with a really heavily contrasting thread.

I also made this keyring the other day, lets just say it was a learning exercise... The rivet was my first one and it went wonky, cutting a tiny slot with a knife through two layers was not a fun thing and I made a bit of a pigs ear of the stitching placement. I did however enjoy making a little geometric design with my awl.

British and family owned producer of rawhide and other non-marring and sparking hammers. I've got a bunch of their stuff that I like to use for leatherworking - a big heavy rawhide hammer and a couple of lighter replaceable-face mallets.

Really good quality, very reasonably priced and quick shipment (although shipping is a bit pricey to mainland Europe, there might be local stockists however). Never had an issue with any of their products.

https://www.thorhammer.com/thor-history/

British and family owned producer of rawhide and other non-marring and sparking hammers. I've got a bunch of their stuff that I like to use for leatherworking - a big heavy rawhide hammer and a couple of lighter replaceable-face mallets.

Really good quality, very reasonably priced and quick shipment. Never had an issue with any of their products.

https://www.thorhammer.com/thor-history/

I had a lot of fun today. I had the day off so went down to the leather shop where my crafting journey began and bought a bunch of new tools, supplies and more leather offcuts to have more fun. I ended up getting around 8kg of leather, some black Tokonole, Sam Brown studs and punches, double cap rivets and setter, water based glue and some wing dividers.

When I got back I made this little wrist cuff thing, its rather comfortable, really just made it to see what an adjustable item using the stud could look like to have a go at using it.

I also made a little clutch I had been wanting to make for a while, it was actually one of the first patterns I downloaded, printed and stuck to card but I just didn't have any leather of the right thickness and size. I think the leather I ended up using was a little on the thin side but this was otherwise a very simple little project.