For the uninitiated: https://www.youtube.com/watch?v=VgamwEi90w4
ClassyHatter
Korjaus korjausaikataulun korjattuun korjausaikatauluun:
Edit 3. 20.11.2024 kello 10.20. Päivitys korjausaikatauluun. Tämän hetken tiedon mukaan laitoksen sähköntuotantoa päästään jatkamaan perjantaina 21.11.2024.
Edit 4. 20.11.2024 kello 12.10. Korjaus edelliseen päivitykseen. Laitoksen sähköntuotantoa päästään jatkamaan jo torstaina 21.11.2024, mutta perjantaihin asti laitosta ajetaan pienemmällä tehotasolla.
Pienempi tehotaso on 1310 MW. Normaaliin tehotasoon päästään perjantaina klo 01:00.
Fortumin uutiseen päivitettiin vian syy (Loviisa 2):
Vian syynä oli säätösauvakoneiston jäähdytysjärjestelmän häiriö, jonka vuoksi laitos joudutaan jäähdyttämään kylmäseisokkiin ohjeiden mukaisia tarkastuksia varten. Tarkastusten ja tarvittavien korjaustöiden jälkeen reaktori lämmitetään uudestaan ylösajoa ja laitoksen uudelleenkäynnistämistä varten.
UMM-tiedotteen perusteella myös Olkiluoto 3:n vika on selvinnyt.
Loviisa 2:n pitäisi käynnistyä 21.11. 21:00 (UMM-tiedote). Sen ylösajo kestää 17 tuntia. Olkiluoto 3:n pitäisi käynnistyä 20.11. 12:00. Sen ylösajo kestää 5 tuntia.
Tämän viestin UMM-tiedote -linkit taitaa jopa toimia.
Tuulivoimaa näyttäisi ennusteen mukaan olevan aika hyvin huomenna tarjolla, joten ehkei noi hinnat ihan kauheasti tuosta pompsaha. https://www.fingrid.fi/sahkomarkkinainformaatio/tuulivoiman-tuotanto/
Lemmy ei näköjään tykkää UMM-palvelun linkeistä nykyään. Erikoismerkit korvautuu URL-koodatuiksi merkkijonoiksi, myös lähdekoodi-blokin sisällä.
~~Kokeileppa ladata tämä sivu uudestaan. Oli hiukan ongelmia sen linkin kanssa, koska tuo yksi virveli halusi korjailla noita erikoismerkkejä. ~~Tässä (ehkä) toimiva linkki:~~ Ilmeisesti liian vaikea linkki, mie luovutan. Alkuperäisen postauksen linkin pitäis toimia.~~
Channel width is a router setting so it affects everyone who connects to that router. With 40 MHz channel width the maximum connection speed of 5 GHz network is between 150 and 300 Mbps, depending on which Wi-Fi version the router and devices support. If your internet connection happens to be 100 Mbps, it wouldn’t benefit having a faster Wi-Fi connection. Except that the connection quality affects the connection speed, so that 150 Mbps might be less than 100 Mbps if the device is far from the router or the connection is bad for some other reason. The connection speed is important only when downloading or uploading big files. For typical web browsing, video streaming and gaming the connection speed of few tens of Mbps is sufficient. DNS resolving speed for web browsing and ping for gaming are much more important than connection speed.
There’s probably no need to set the 5 GHz channel width to lower than 40 MHz unless the 5 GHz band is really crowded around you. 2.4 GHz should ~~almost~~ always be set to 20 MHz if there are other Wi-Fi networks.
Stupid Differently. Apple’s new slogan.
!buildapc@lemmy.world is a more active community.
Many plants have anti-nutrients, compounds that inhibit absorption of nutrients. Both coffee and tea inhibit absorption of some minerals, such as iron.
NetSpot and InSSIDer are often recommended. I also noticed that Apple’s AirPort Utility (iOS) can show channels and signal strength of nearby networks. You need to turn on a setting in the Settings app to enable that feature. But it doesn’t have a clear UI that would help you to figure out the best channels.
Wi-Fi extenders are usually worthless. If you want to extend your network you should use mesh network.
Another thing that helps with interference is lowering the channel width. Using wider channels gives better throughput but there will be more interference. If you don’t transfer much data between your devices wirelessly and you don’t have some crazy fast internet connection, setting the channel width to the lowest for both bands is the safest option.
Missing lids on the cassette decks gives it away that the device might no longer be fully functional, but thanks for confirming it.
Se on aamupäivä luettava kirjoja kynttilän valossa.