homeassistant

15748 readers

7 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Should I Be Switching My Dongle To Run As An RCP? (lemmy.tf)

submitted 2 years ago* (last edited 2 years ago) by sabreW4K3@lemmy.tf to c/homeassistant@lemmy.world

2 comments fedilink hide all child comments

One of the things I'd been putting off through pretty much cowardice, was updating my Zigbee coordinator. However, this morning I said fuck it and found the tabs that I opened about it again.

This turned out to be a great idea because not only did I have the tabs for the wrong device open, the right tabs updated and now the process was simpler than ever. Hooray!

But there was some extra stuff in there, no longer was it just about updating the dongle, now it was about enabling Matter/Thread and switching from NCP to RCP. Network Co Processor to Remote Co Processor to the ignorant like myself.

I didn't opt for this, but I'm wondering if I should? If any of you have?

BTW, the only issue I had with my set-up after upgrading the dongle firmware is that I had to manually restart the Zigbee2MQTT container afterwards and the initial cable I was using, wouldn't do the upgrade, so I switched to my cheaper one from AliExpress which did it with ease, but that was obviously beforehand.

Edit: Here's the resource I used: https://dialedin.com.au/blog/sonoff-zbdongle-e-rcp-firmware

top 2 comments

sorted by: hot top controversial new old

[–] caleb@lemmy.moorenet.casa 3 points 2 years ago (1 children)

Only do it if you have, or when you get Matter/Thread devices on your network. IIRC, last time I looked at this it appeared to be much more complicated, required an extra add-on container, and was expiremental, so came with the caveat of 'things might break on updates'.

[–] sabreW4K3@lemmy.tf 1 points 2 years ago

Ah, okay. Thank you for the heads up.