ErgoMechKeyboards

6817 readers

1 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 2 years ago

MODERATORS

Dragonfruit by protieusz - my first trackball build (lemmy.world)

submitted 2 years ago* (last edited 2 years ago) by DeltaWhy@lemmy.world to c/ergomechkeyboards@lemmy.world

9 comments fedilink hide all child comments

Been daily driving low-profile Gateron switches for a while but wanted to give MX another shot. Mostly so I can use my nice keycaps again. I didn't buy this filament specifically for this build but I think it works really nicely.

Switches are Ergo Clears, lubed and filmed with (IIRC) 45g springs. They were previously on an Ergodox and barely got any use as I switched to smaller boards shortly after modding them and wasn't comfortable with desoldering yet, so I'm happy to have finally found a new home for them.

Caps are MT3 Godspeed, case is Overture Matte PLA (light blue and white), printed on the Sovol SV06 Plus.

top 9 comments

sorted by: hot top controversial new old

[–] v_krishna@lemmy.ml 7 points 2 years ago

It reminds me of a Stanley Mouse graphic used for a lot of Grateful Dead art

[–] wjrii@kbin.social 2 points 2 years ago

I made a split, even posted it here on c/emk, but at this point I am just too old, yes, too old to begin the training. I had no motivation to actually learn to type on the thing, but rather just wanted to make more keyboards.

This is the first one I've seen that made me (briefly) reconsider. Nice work!

[–] freedumb@programming.dev 1 points 2 years ago (1 children)

Great quality on that 3D printed base! Did you model it yourself?

[–] DeltaWhy@lemmy.world 1 points 2 years ago

No, I just printed the case files from the GitHub repo.

[–] markstos@lemmy.world 1 points 2 years ago (1 children)

I like it! Although I would prefer 3x6.

[–] DeltaWhy@lemmy.world 2 points 2 years ago (1 children)

There are some similar boards with 3x6 layouts - ffkb and vulpes majora, both by fingerpunch, support 3x6 with a center trackball. I do miss the extra keys a bit with 3x5 layouts - when I eventually design my own board I think I'm going to do a 40 key layout.

[–] markstos@lemmy.world 1 points 2 years ago

I’ve looked at those but the 6th column stagger is a bit much for me with those.

[–] Evil_Shrubbery@lemm.ee 1 points 2 years ago* (last edited 2 years ago)

I was about to mention them - those keycaps are indeed peak functional design for me, just superb.

[–] shinnoodles@lemmy.world 1 points 2 years ago

I am terrified yet intrigued by this absolute monster