Home Automation

89 readers

5 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 2 years ago

MODERATORS

communick@selfhosted.forum

Newbie and clueless--old, disconnected alarm that died and door/window sensors that don't work... Help please (alien.top)

submitted 2 years ago by LosersSizeDown@alien.top to c/homeautomation@selfhosted.forum

4 comments fedilink hide all child comments

Hi everyone,

I live in a house where there used to be an alarm system but the previous owner disconnected it, I guess, so it worked for a while for me with the door/window sensors although I never paid for an alarm system or subscription--I could hear the beep and feel "safe." But, they don't work anymore--after a big storm and power outage, the alarm screen (IQ panel) went off and now it never comes back (I tried to push buttons to reset, unplug it a million times... Nothing. It starts and then it goes dark. See pics attached.)

My question is not so much about the screen/alarm going dead, but about how to "reactivate"/"recycle" the door and window sensors even if the screen/alarm no longer works. Can I use the door sensors already installed throughout the house if I connect them to another device/something else? And if so, what would that "something else" be?

Can I reuse them and not have to pay for a subscription or buy an alarm service?

Would I have to buy a "hub" (is that what is called? A device that activates and connects all of the sensors?)? Is it hard to install? Do I have to install it in a specific place?

Any additional tips budget-wise?

I'm totally lost because all of this is new to me. Any help would be appreciated. And if you could add detailed info as if you were explaining it to a 5-year-old, that would be great. I really want to feel more comfortable and safe, for my little one and for me. If this is not the group where I am supposed to ask, can you please redirect me to another Reddit group?

Thank you in advance!

https://preview.redd.it/759b5ebcyi1c1.jpg?width=3060&format=pjpg&auto=webp&s=d28bdc90d98e7612b18dd2625f1990c632df8590

https://preview.redd.it/q5rcohbcyi1c1.jpg?width=3060&format=pjpg&auto=webp&s=3436c96c951c8fef384664333c6b27c382548f69

https://preview.redd.it/lcvfyobcyi1c1.jpg?width=3060&format=pjpg&auto=webp&s=f86f65e8347e583f3bc507168142dace14ca6f14

top 4 comments

sorted by: hot top controversial new old

[–] velhaconta@alien.top 1 points 2 years ago

Konnected

[–] apocalypsebaconstrip@alien.top 1 points 2 years ago

Panel seems fried. If you disconnect and reconnect to power with no response, its dead. Without the panel, those sensors have nothing to communicate with. It's either replace the panel, or replace the whole system.

For what you want, simplisafe or something sounds perfect. You don't even have to pay the monthly subscription to use the sensors or alarm.

Edit: Found a replacement panel on ebay, no guarantee you can provision the sensors to it yourself though. https://www.ebay.com/itm/125616888699?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=l1iaPyWwQFO&sssrc=4429486&ssuid=EXVRJ8MXR4O&var=&widget_ver=artemis&media=COPY

[–] kichckcc@alien.top 1 points 2 years ago (1 children)

Can I reuse them and not have to pay for a subscription or buy an alarm service?

Reusing these sensors is not very profitable... It looks wireless in the photo, right? You would need to determine what type of transmission there is: RF433 or something else. Then you would have to recognize the codes it generates and build a whole background for it.

More or less... https://www.youtube.com/watch?v=jrto7hc4rtg

In 2023, it simply makes no sense, both financially and time-wise. There are ready-made solutions available and they don't cost a fortune.

The sensors themselves are the cheapest element of the alarm puzzle... so using the old ones doesn't make much sense because it only generates a lot of unnecessary problems.

Replacing such a sensor is also not a task that you will not be able to do on your own.

[–] LosersSizeDown@alien.top 1 points 2 years ago

Thank you. Which ready-made solutions do you recommend?