I saw someone online selling replacement stainless steel pucks for this but who knows where I saw that now
this post was submitted on 11 Jan 2026
52 points (98.1% liked)
Ask Lemmy
36553 readers
860 users here now
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com.
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !askusa@discuss.online
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
founded 2 years ago
MODERATORS
Ahhh that would be awesome! I'm sure I'll love the dedica once I get it working, but I don't like how the internals are almost entirely plastic excepting the screws and the thermoblock.
I would buy the replacement part. I'm all for DIY solutions when they make sense but in this case it's only a $14 the replacement part.
You can’t fix a seal with wood glue or cyanoacrylate. Buy the part.
Looks like ABS plastic. You can dissolve ABS with acetone, reshape and it'll harden back up as the acetone evaporates.
Also consider epoxy. I like to mix it with a bit of colloidal silica to get it less runny.
It will never be as sturdy as it was and will likely deform, which may compromise its ability to seal and hold pressure reliably.
Epoxy/silica introduces food safety concerns (assuming this is in the path of pressurized, boiling water), and assuming OP is not a person that typically does repairs introduces cost as well. A small pack of epoxy, which is more than enough, is probably like $5-7. I don’t know how much silica is but that’s not necessary, tbf. If OP doesn’t do this kind of stuff often the excess is wasted, essentially, and you’re already at almost 50% of the cost of the replacement part for a chance at a a fix that might not work or be food safe.
Buy the replacement part
If you can fix, then fix it. Else buy a new one.
Use “crazy glue” assuming this is a colloquial term for Cyanoacrylate, CA or super glue.
Fill the whole hole up, then drill it out with a drill bit a bit smaller than the diameter of the screw threads, then screw the screw in.
Just glueing the screw into the hole will not generate much clamping force and may not fix your problem.
“Krazy Glue” is a brand of superglue in the US
It's a CA glue
First, yes, fix it.
I wouldn't use wood glue or cyanoacrylate. Get a proper tube of two part epoxy that will set foodsafe.
If it’s likely to come into contact with water, could that water then end up in the cup?
If yes, you need to consider the safety implications of the materials you chose. I expect the manufacturer chose safe materials, while your glue might not be safe under high pressure and temperature. What if something really nasty gets in your cup as a result?
I mean, generally I agree, but assuming the supplier handed you safe ingredients is exactly how quite a few poisoning incidences throughout history have happened.
While that's highly applicable to whether you should glue it or not, it's surprisingly less applicable as to whether what the manufacturer decided to glue it with in the first place was equally acceptable.
A shocking number of manufacturers/distributors do not care what goes in to the process.
Manufacturing things in the Wild West means you can get away with anything. The safety of the general public becomes a concern only when you’re trying to do business with a country that has regulations in place.
I thought the part would be super expensive. 14 is a bargain for appliance parts. My only concern is whether the part might be poorly manufactured
You could do both, I reckon. You can try to fix the part while having a new one on stand by. If your repair fails, you’ll have the new part ready to go and it’ll’ve cost you the $14 and you holding the new part for however long it took for the repair to fail (the repair might work well for quite a long while.)
Buying the new part is of course the simpler option.
If you had asked about replacing the machine vs fixing it, then fix it. However in this case the fix is buying the part. DIY repairs are for when you can’t get the part or they don’t sell them.
“Anyone can buy a new boot, but to fix an old one not too many people can do it” - https://youtube.com/shorts/SSDwSiQQ8fI
Delonghi parts are easy to get a hold of too, so get the part if you can
If it’s plastic then fill with epoxy and send it.
But that part is really cheap. I’d buy new unless it’s not available.