Also, when they're lying on the floor as shown, they make walking on Lego feel like a foot massage with a happy ending.
this post was submitted on 18 Oct 2025
292 points (97.1% liked)
196
4749 readers
1741 users here now
Community Rules
You must post before you leave
Be nice. Assume others have good intent (within reason).
Block or ignore posts, comments, and users that irritate you in some way rather than engaging. Report if they are actually breaking community rules.
Use content warnings and/or mark as NSFW when appropriate. Most posts with content warnings likely need to be marked NSFW.
Most 196 posts are memes, shitposts, cute images, or even just recent things that happened, etc. There is no real theme, but try to avoid posts that are very inflammatory, offensive, very low quality, or very "off topic".
Bigotry is not allowed, this includes (but is not limited to): Homophobia, Transphobia, Racism, Sexism, Abelism, Classism, or discrimination based on things like Ethnicity, Nationality, Language, or Religion.
Avoid shilling for corporations, posting advertisements, or promoting exploitation of workers.
Proselytization, support, or defense of authoritarianism is not welcome. This includes but is not limited to: imperialism, nationalism, genocide denial, ethnic or racial supremacy, fascism, Nazism, Marxism-Leninism, Maoism, etc.
Avoid AI generated content.
Avoid misinformation.
Avoid incomprehensible posts.
No threats or personal attacks.
No spam.
Moderator Guidelines
Moderator Guidelines
- Don’t be mean to users. Be gentle or neutral.
- Most moderator actions which have a modlog message should include your username.
- When in doubt about whether or not a user is problematic, send them a DM.
- Don’t waste time debating/arguing with problematic users.
- Assume the best, but don’t tolerate sealioning/just asking questions/concern trolling.
- Ask another mod to take over cases you struggle with, if you get tired, or when things get personal.
- Ask the other mods for advice when things get complicated.
- Share everything you do in the mod matrix, both so several mods aren't unknowingly handling the same issues, but also so you can receive feedback on what you intend to do.
- Don't rush mod actions. If a case doesn't need to be handled right away, consider taking a short break before getting to it. This is to say, cool down and make room for feedback.
- Don’t perform too much moderation in the comments, except if you want a verdict to be public or to ask people to dial a convo down/stop. Single comment warnings are okay.
- Send users concise DMs about verdicts about them, such as bans etc, except in cases where it is clear we don’t want them at all, such as obvious transphobes. No need to notify someone they haven’t been banned of course.
- Explain to a user why their behavior is problematic and how it is distressing others rather than engage with whatever they are saying. Ask them to avoid this in the future and send them packing if they do not comply.
- First warn users, then temp ban them, then finally perma ban them when they break the rules or act inappropriately. Skip steps if necessary.
- Use neutral statements like “this statement can be considered transphobic” rather than “you are being transphobic”.
- No large decisions or actions without community input (polls or meta posts f.ex.).
- Large internal decisions (such as ousting a mod) might require a vote, needing more than 50% of the votes to pass. Also consider asking the community for feedback.
- Remember you are a voluntary moderator. You don’t get paid. Take a break when you need one. Perhaps ask another moderator to step in if necessary.
founded 9 months ago
MODERATORS
Like the Lego scenario, it's a lesson in putting toys away after use. Just a lot less merciful...
I've done it twice and I have both occasions etched indelibly into my memory.
This is why going back to stone age good idea. Grug no stab self with amber spark. Grug instead touch sharp stone and die. Much easier.
load more comments
(1 replies)
Not being able to plug them in the other way around would drive me nuts. I prefer Schuko.
I think while the British plug is good, there's lots of great design globally.
Arguably time to adopt all of them for a global standard that rocks
Well yes, but also no. I think the plug designs should be unified, but based on the network's power and frequency. We all know that with truly unified plugs things would blow up constantly because people plug 115V devices in 230V outlets, or are pissy on social media due to 230V 50hz not being the same as 230V 60hz. "But the plug is the same!!" (angry electronic fizzling in the background)
I mean. That should be a given for different voltages. But for frequency... most things can be made to adapt to either or. Japan for example uses both depending on the region.
Even voltages, most things these days are just SMPSs driving low voltage electronics. They DGAF about the voltage, they just adjust the duty cycle until the output is at 5V.
load more comments
(3 replies)
It is a very good design from an electrical and safety point of view.
Sadly it's also larger than a lot of appliances it provides power to in 2025.
Here is a multi socket plug, you can plug 3 things, its 3m long
load more comments
(2 replies)
~~The live and neutral ports commonly lack the shutter and~~ the fuse is not always present (edit: on low power devices). Some devices for whatever reason also feature a plastic earth prong which serves only to release the shutters to allow a connection. ~~And if the earth is not present or is broken then the plug will sit loose in the socket.~~ Another "feature" of these plugs is that they lay flat on a surface and hurt to step on.
Otherwise they serve their purpose really well.
load more comments
(3 replies)
Also internally, there is extra slack on the lead connecting to the earth pin. So if you pull too hard on the cable, the live wire will break before the ground wire.
That is standard for all rewirable connectors though.
Yes, also its rewireable!
It's not bad. SchuKo also has its merrits, though.
And all other systems are basically crap compared to these two.
The Swiss standard, which is basically Europlug with a staggered earth pin, seems a step up from Schuko. You can fit three of them in the space of one Schuko socket.
There’s a newer standard which is meant to be international, and which is like a slightly smaller version of the Swiss plug, but only Brazil has fully adopted it (IIRC, South Africa is in the process of moving to it)
Not sure about the step up thing.
I see several tradeoffs being made to gain a size benefit, which is lost again the moment you realize you can't have reversable angled plugs any more...
load more comments
(1 replies)
It’s great in a world of electrical appliances which need to be earthed for safety, but the mandatory earth pin and extra-chunky dimensions take up much more space than required for unearthed devices (such as most modern electronics). There should be a Europlug-style 2-pin variant.
Also square pins make better contact than round ones
Being big, cumbersome and annoying is what makes them special.
Rather like half the users in this thread tbh
is this drax propaganda? Seems like this was made by the UK’s largest carbon emitter....
No, it's a plug propaganda infographic that was made by the UK's single largest source of deforestation
• Carry electrical current
They could have thought of a better sales point than that.
As a side thought, while ground shouldn't normally carry current, it's probably the most important prong when it actually needs to.
From all I read so far, the UK plugs are indeed superior to EU and most other plugs. Still I feel like I'd miss the option to plug things upside down.
Live and neutral are typically not interchangeable. fuses should be on the live cables so that over current is stopped on the way in. Plugging in the wrong way means that a blown fuse might stop current, but the device could still be at live voltages and be dangerous.
that's why you put fuses in central fuse box, not in the plug. appliances should be designed in such a way that it shouldn't be a problem. nobody else does this because it's not necessary if your installation is sanely built
This is the reason why uk home electrical wiring has fuses everywhere. It is a safety measure that mitigates other problems like poor design and bad installation practices
load more comments
(2 replies)
A fuse/breaker at the fuse box needs the current capacity for all, or at least most devices on at the same time. The individual fuses can be rated much lower.
uk fuse in fuse box can't be sized properly because old uk installations used ring circuits in order to save copper during ww2 shortages, everybody else has this problem sorted out by now (initially by using aluminum wiring, or waiting for more copper). modern wiring is arranged in star-type topology with a few outlets per leg, and it can be fused properly, but the far out parts of circuit don't transmit power at all times which is why it was looked down upon during shortages
example would be 16A circuit that has 5-10 16A outlets, has wires suitable to carry 16A and 16A fuse. it's okay because you're not expected to draw full power at all outlets at the same time, and most of the time much less than that. if you do and you know it in advance you're expected to split it over more circuits, or make it bigger. uk ring circuit would have wires that carry only 8A in each direction, and fused 16A. it can fail in a way where one side disconnects, but the other side becomes overloaded. plug fuses are for protection of these shitty circuits from shortcircuit in appliance
load more comments
(3 replies)
The central fuse boxes only protect the house wiring. You need a lower rated fuse for individual devices. That 30A central fuse ain't gonna protect the wiring inside your 6A lamp.
load more comments
(1 replies)
load more comments
(1 replies)
Polarized live/neutral is still insane to me. All it takes is one cheap electrician or overconfident DIY to introduce a potentially lethal false sense of security.
The rest of the world has chose your own adventure plugs
I come from the land of suicide showers (good ol' Lorenzetti, iykyk) and I find the UK plugs overengineered to the max. But I like them, they make me feel safer. I would like some place inside the bathroom to plug my hairdryer, though.
Has British electronics gotten better then? Used to be rubbish to the point it was a running joke in movies.
I must have missed this, I don't even think we have electronics if you mean like consumer electronic equipment, just stuff made in the far East with a brand slapped on it
I know we still make the Henry Hoover but I can't for the life of me name an electronics brand with a factory here.
Dyson and Raspberry Pi. Just to name a couple British companies
James Dyson campaigned for the vote leave campaign citing the ability to create (UK) jobs without EU interference.
He then promptly moved his main factory and head office to Singapore and recently cut 1,000 UK jobs.
Fuck that guy and his over priced vacuums.
load more comments
(1 replies)
Just like everything British, their colonies have done it better. Aus plugs are just UK plugs but better.
But Aus plugs suck compared to Euro, especially German where it's like Usb micro to USBC comparison.
UK with USB B.
Aus plugs are not requierd to have a fuse in them however
imagine not having the full metal exposed and worryingly close to your fingers
view more: next ›