You put your house upside down
this post was submitted on 23 Sep 2025
636 points (98.8% liked)
Dogs
5849 readers
103 users here now
A community about dogs.
Breeds, tips and tricks about training and behaviour, news affecting dog owners, canine photography, dog-related art and any questions related to dog ownership.
Rules
- Posts must be related to dogs or dog ownership and must not be void of content.
- This is a neutral space. No bigotry or personal attacks. Criticism should be polite and constructive.
- No automated content. This includes AI generated imagery, post body, articles, comments or automated accounts.
- No advertising or self-promotion.
- Illegal or unethical practices are frowned upon, and any comments or posts suggesting them will be removed. This includes, but is not limited to, backyard breeding, ear and tail cropping, fake service animals, negative reinforcement, alpha/pack/dominance theory, and eugenics.
- No judging or attacking community members who care for dogs with cropped ears, docked tails, or those from puppy mills or questionable sources. While we discourage these practices (per Rule 5), all dogs deserve loving homes and compassionate care regardless of their background or physical alterations.
- No breed discrimination, all breeds welcome. Our stance matches the ASPCA's official stance and is not up for debate.
- Citing your sources when making a claim is encouraged. Misinformation will be removed.
founded 2 years ago
MODERATORS
...or you could install a screen door, leave it closed but open the wood door...
Some people live in areas with inclement weather.
Or areas with crackheads.
I mean, a crackhead will break some glass n crawl tf thru
Thanks for reminding me of that word
dogs go through screen easily lol
Like a glass door, not chicken wire
For what it’s worth, this would be intentional. They would have had to buy a blank door panel and make the lockset holes and hinge gains themselves. The handle holes aren’t center in the door, and the hinges aren’t equidistance either.
So not an idiot, and at least a little handy if they didn’t just pay someone to intentionally do this as well. Most people would just buy prehung doors, especially the front.
My first gig was construction. The foreman and another guy were talking about how pre-hung doors were the best thing ever made.When I asked them why they believed this they worked with me to hang a door. Fuck that, pre-hung doors are like the 4th greatest creation of the 20th century.
I literally just replaced all the interior doors in my house myself, its not hard if you use a jig, two routers, a faceplate jig, strike plate jig, impact driver, two drill drivers with one hooked up to a portable drill press and the other with an augur, another drill driver with the hinge pilot hole gadgets, saw stands, door stand, track saw, and air bags to lift the doors. Oh, ohhh
Except firedoors, fuck those overweight mother fuckers and their stupid hidden self shutting chains
I had to do one with just hand tools. No power tools allowed on site, and dragging the door inside outside was a 15 minute ordeal each way. And had to do the frame by hand anyways…
So hand cranked hand auger for the lockset, and a chisel and hammer for the hinge gains. Took me a whole damn day to do that one door.
Yeah there is good reason to my madness when it comes to the number of tools I used, no faffing about changing bits or resetting jigs or manual measuring. I would reckon about an hour a door from unpacking it to having it fully trimmed and hung. Would have been a bit quicker but I went with magnetic latches so they needed a 80mm back box and my 1/2 router only does 70mm deep so I had to use the drill press with a Forstner to get the remaining 10mm clearance needed.
I have done doors by hand, thats about 3 to 4 hours for me if I do not have to make a proper square backbox and I can get away with a round one via an auger. I do not like the bite of an auger if the backbox depth is even remotely close to the edge of the frame for the door due to the bite you get dragging you in further than you intended even when turning by hand. I much prefer a Forstner, but I will be fucked if I am going to hand crank one of those into oak.
Its decidedly longer if my chisels aren't sharp, having to hand sharpen them is a PITA when its more than once a day, I wish I had the space for a wheel to speed that up. Other dream thing is a 360 degree door vise that holds the entire door and lets you spin it 360 degrees without having to take it off your stands and hand rotate it. Would make switching from hinges to mortise to handles a breeze.
I worked as a Carpenter for a GC (employed, not contractor), so it was always a fine line between keeping us busy and being efficient by using the right specializations. Yeah I can do some drywall taping and mudding, but god if we aren’t busy, please sub that crap out, it’ll look better anyways. But I’ll also take the 3 days of pay instead.
Plastering I will only ever do for myself, and then only to save money as I am too tight to pay someone else to do it, much the same reason I do tiling or plumbing. They are one of those jobs like fine carpentry that is always better done by an expert with the years of just doing that.
Plasterboard layup often gets left to the builder in the UK, assuming they can actually level it properly.
You mean lath and plaster? They still use that? I mean installing drywall panels and taping the joints and skim coating. But yeah plastering is more like concrete finishing, an art, and definitely left to the professionals.
Would rather place and finish concrete over mudding and taping though, better on my hands.
I would still call it layup as we still use the same plasterboard panels in the UK if they are having a skim or a proper multi coat plaster finish, regardless if they going onto framing or dot and dab onto breeze blocks. We do have old houses that are basically brick on the interior so have render and then plaster on top of that, like nearly 20mm of it.
Its always my shoulder joints with plastering or large tiling that go first, always have too much gear on my board I guess.
Just like those self sealing stem bolts
Yeah they should be sued for false advertising for that claim!
I've hung exactly one door from scratch myself. In the time it took me to do that, I could have put up 8 prehung doors.
That's not even a little bit of an exaggeration.
The only catch is that door we made is the only door that 35 years later has no gaps and closes and opens perfectly according to the current owner (grandson of the og owner).
load more comments
(1 replies)
I suppose it doesn't matter much in the US where those are more rare, but in the rest of the world where there are a lot of old buildings where absolutely nothing is straight in any direction whatsoever, installing a door or window properly is a major endeavour if you want it to be properly balanced. Hanging the door on is a minor part of the whole affair.
load more comments
(25 replies)
When I was a kid, my dad had a friend who had been a carpenter, and retired, but he would still hang doors. He said the amount of money he could charge for that made it worth doing them.
load more comments
(3 replies)
load more comments
(8 replies)
Pretty cool, though I think that would just encourage my dog to bark and get worked up any time someone walks by
I agree with you. There's a house near a school by me that has a looking Glass for the dog, and all the kids get scared cuz he barks at them all
they'd get used to it and eventually respond the same as when it wasn't there. source: got a big metal screen door so i can leave the main door open and get a good breeze
Mine does that even without being able to see outside. They just sense a presence and lose their shit.
Or the ghosts that frequent my street. Cause ain't no one around half the time.
The idiot should have just gotten upside down dogs.
Sure, that is what I would say too if I did that.
view more: next ›