this post was submitted on 16 Sep 2025
46 points (97.9% liked)

Sewing, Repairing and Reducing Waste

1986 readers
23 users here now

A place to share ideas, knowledge and creations with textiles. The focus is on reducing waste, whether that be sewing from the scraps left from other projects, using the end of rolls and remnants, or repairing and remaking finished pieces.

founded 2 years ago
MODERATORS
BrightFadedDog@sh.itjust.works
46
Stop hole in wool shirt from getting worse? Penny for scale. (sh.itjust.works)
submitted 1 day ago by hereiamagain@sh.itjust.works to c/sewingrepairing@sh.itjust.works
15 comments fedilink hide all child comments
 

This is a lightweight wool shirt, smartwool brand. I think it's 90 or 100 percent wool, I forgot to photograph the tag.

I use it as a base layer while camping, so looks aren't that important, but I don't want it to fall apart.

I got a couple of snags on my last trip, and I poked most of them back in without issue, these two were bigger and I tried stretching the fabric slightly to pull them in. I did it gently, but they both broke ๐Ÿซ 

Should I use a patch? Or sew a few loose stitches to hold things together? Or just leave it alone?

The underside of the shirt is bright orange, the hole is only the top layer, if that makes sense?

Thanks!

all 16 comments
sorted by: hot top controversial new old
[โ€“] janus2@lemmy.zip 10 points 1 day ago (2 children)

There are ways to invisibly or barely-visibly repair knits, of varying degrees of difficulty (largely depending on yarn weight)

Repair What You Wear | How to mend holes in knitwear
barely-visibly repair hole by using needle and thread to carefully gather edges

Knitting Magic | Learn How to Perfectly Repair Holes in Knitted Sweater - Invisible Mending
invisibly repair single row of missing stitches by replacing them, using yarn and needle

NibleNeedles | How to mend knitting like a pro! invisibly repair multiple rows of missing stitches by replacing them; using yarn, needle, double ended knitting needles, and crotchet hook

[โ€“] janus2@lemmy.zip 5 points 1 day ago (1 children)


Sunny TV | How to Repair a Hole in a Fine Yarn Knit Sweater
invisibly repair multiple missing rows in a fine gauge knit using yarn, needle, and latch-hook

[โ€“] hereiamagain@sh.itjust.works 3 points 3 hours ago (1 children)

Holy cow thanks for all this extremely specific instruction! I will look into it and report back!

[โ€“] janus2@lemmy.zip 1 points 1 hour ago

best of luck! :)

[โ€“] janus2@lemmy.zip 3 points 1 day ago


Chelsea Quintela | Repair Hole in Seconds No Sew D.I.Y.
repair hole in fine gauge knit using heat bond interfacing (easiest but your holes may be too large for this)

[โ€“] Zachariah@lemmy.world 9 points 1 day ago (1 children)

darn

[โ€“] hereiamagain@sh.itjust.works 3 points 3 hours ago

I recently learned what that means from perusing this community haha

[โ€“] pageflight@piefed.social 7 points 1 day ago* (last edited 1 day ago) (2 children)

I think the suggestion to just stitch around it is probably sufficient, but an earlier post in this community pointed me to using a speedweve to basically weave a little patch in-place, picking up stitches around all the sides to sew it onto the mended garment. Looks pretty cool if you want to go to that much effort.

(Edit: Video with clearer instructions, also demos on non-hand-knit fabric.)

[โ€“] hereiamagain@sh.itjust.works 1 points 3 hours ago

Very cool looking, I will consider this thank you! I had no idea

[โ€“] rbn@sopuli.xyz 4 points 1 day ago* (last edited 1 day ago) (1 children)

If you just want to stop the hole from expanding, I'd sew a circle around it and slightly pull it together. If the hole is too big and the pulling resulted in wrinkles, I'd do 4-8 diagonal connections on the inside of the cloth (so the hole looks like a cut pizza) and then sew a spiral until you reach the middle of the circle.

If you want to turn the hole into a little art project, you can also look up 'visible mending' on the search engine of your choice.

[โ€“] hereiamagain@sh.itjust.works 2 points 3 hours ago

Thanks for the recommendations!

[โ€“] Mandarbmax@lemmy.world 6 points 1 day ago* (last edited 1 day ago) (1 children)

I'd toss a few stitches in there to pull it back together as you say, except I would probably try to use as many stitches as I could in the space to more evenly distribute the force around the hole. I'm not very experienced at mending stuff though so if someone else comes in and says something else trust them instead.

I love to see people fixing cool stuff though so good luck with an easy and effective repair, my friend!

[โ€“] Davel23@fedia.io 3 points 1 day ago (1 children)

Get some clear nail polish and dab a glob on the hole.

[โ€“] hereiamagain@sh.itjust.works 2 points 3 hours ago

Yeah if it came to that I would, but I'd like a not elegant repair first.

Looks aren't an issue, but I feel like I'd feel that lump of polish