this post was submitted on 01 Aug 2025
99 points (98.1% liked)

196

4037 readers
1973 users here now

Community Rules

You must post before you leave

Be nice. Assume others have good intent (within reason).

Block or ignore posts, comments, and users that irritate you in some way rather than engaging. Report if they are actually breaking community rules.

Use content warnings and/or mark as NSFW when appropriate. Most posts with content warnings likely need to be marked NSFW.

Most 196 posts are memes, shitposts, cute images, or even just recent things that happened, etc. There is no real theme, but try to avoid posts that are very inflammatory, offensive, very low quality, or very "off topic".

Bigotry is not allowed, this includes (but is not limited to): Homophobia, Transphobia, Racism, Sexism, Abelism, Classism, or discrimination based on things like Ethnicity, Nationality, Language, or Religion.

Avoid shilling for corporations, posting advertisements, or promoting exploitation of workers.

Proselytization, support, or defense of authoritarianism is not welcome. This includes but is not limited to: imperialism, nationalism, genocide denial, ethnic or racial supremacy, fascism, Nazism, Marxism-Leninism, Maoism, etc.

Avoid AI generated content.

Avoid misinformation.

Avoid incomprehensible posts.

No threats or personal attacks.

No spam.

Moderator Guidelines

Moderator Guidelines

  • Don’t be mean to users. Be gentle or neutral.
  • Most moderator actions which have a modlog message should include your username.
  • When in doubt about whether or not a user is problematic, send them a DM.
  • Don’t waste time debating/arguing with problematic users.
  • Assume the best, but don’t tolerate sealioning/just asking questions/concern trolling.
  • Ask another mod to take over cases you struggle with, if you get tired, or when things get personal.
  • Ask the other mods for advice when things get complicated.
  • Share everything you do in the mod matrix, both so several mods aren't unknowingly handling the same issues, but also so you can receive feedback on what you intend to do.
  • Don't rush mod actions. If a case doesn't need to be handled right away, consider taking a short break before getting to it. This is to say, cool down and make room for feedback.
  • Don’t perform too much moderation in the comments, except if you want a verdict to be public or to ask people to dial a convo down/stop. Single comment warnings are okay.
  • Send users concise DMs about verdicts about them, such as bans etc, except in cases where it is clear we don’t want them at all, such as obvious transphobes. No need to notify someone they haven’t been banned of course.
  • Explain to a user why their behavior is problematic and how it is distressing others rather than engage with whatever they are saying. Ask them to avoid this in the future and send them packing if they do not comply.
  • First warn users, then temp ban them, then finally perma ban them when they break the rules or act inappropriately. Skip steps if necessary.
  • Use neutral statements like “this statement can be considered transphobic” rather than “you are being transphobic”.
  • No large decisions or actions without community input (polls or meta posts f.ex.).
  • Large internal decisions (such as ousting a mod) might require a vote, needing more than 50% of the votes to pass. Also consider asking the community for feedback.
  • Remember you are a voluntary moderator. You don’t get paid. Take a break when you need one. Perhaps ask another moderator to step in if necessary.

founded 6 months ago
MODERATORS
 

This is perfectly fine, right?

top 22 comments
sorted by: hot top controversial new old
[–] notabot@piefed.social 20 points 1 day ago (1 children)

It's not screwed in, and you're going to be hanging a fairly heavy cable out of it. It'll probably be fine short term, but any vibration or movement of the machine or monitor risks partially dislodging the card.

It also looks like you have removed the bracket and reattached it outside the case, which will mean that the plug on the cable can't mate properly with the socket, likely leading to intermittent issues.

In short, it might work for testing the machine, but it'll cause you pain in the long term. Get, or make, a full sized bracket and it'll be much happier.

[–] sem@lemmy.blahaj.zone 2 points 1 day ago (2 children)

You're right the cable doesn't insert properly. :( I'm Hoping to use this machine as a headless server with a graphics card for jellyfin transcodes, and thought that it would be better to be partially secured like this than free floating, especially when I turn the computer back upright.

But if low profile to full-size adapter brackets are standardized, that seems like a better solution. It was just too funny to not take this picture.

[–] notabot@piefed.social 5 points 1 day ago

You'll need a bracket that's designed for the card I think, but if you have a drill and there's a blanking plate you can canibalise you could probably make something good enough for a headless server.

It is a fun picture, I enjoy pictures of mildly horrifying kludges that do the job.

They aren't standardised as different cards have different connectors, locations of connectors, etc. If you aren't even running monitors out of it just run it without a bracket. The PCIe slot itself will secure it, especially because it's such a small card compared to a honking double-wide gaming GPU.

[–] FQQD@lemmy.ohaa.xyz 11 points 1 day ago

at that point just remove the bracket entirely.

[–] whosepoopisonmybutt@sh.itjust.works 22 points 1 day ago (1 children)

Janky but if it works, it works.

[–] Impound4017@sh.itjust.works 26 points 1 day ago (1 children)

I’ve seen cardboard boxes used as PC cases. The only true rule in PC building is “Does it post?”

Yeah, I've run a PC from a motherboard box before. If it works, it works.

[–] zqwzzle@lemmy.ca 14 points 1 day ago* (last edited 1 day ago)

You can probably just get a full sized bracket from Ali express if it bothers you too much.

that's what duct tape is for

[–] fidgeting9658@lemmings.world 9 points 1 day ago

The real question is "does it work?" If yes, carry on. If no, rethink this single life decision.

[–] recursive_recursion@piefed.ca 11 points 1 day ago

It's fine, especially if you aren't intentionally shaking the system.

I'd check it like once a year but besides that as long as it works I don't think you've got anything to worry about.

My close friend has loose ssds in their system that hangs off their sata power cables which I worry about more, although seeing as how they've yet to report any issues even that zaney decision is still going strong for at least 3 years now.

[–] deadbeef79000@lemmy.nz 5 points 1 day ago (1 children)

Just don't.

This puts lateral stress on the motherboard pci socket and on the ports soldered to the card.

Better to remove the back plate entirely.

[–] sem@lemmy.blahaj.zone 2 points 1 day ago (2 children)

As in, it's applying a force on the pci-e slot in the direction of the back plate? That makes sense.

On the other hand, when I turn it back upright, gravity will apply a downward force on the pci-e. :(

I will try loosening the screws so the lateral force is less but still enough to counteract gravity.

[–] princessnorah@lemmy.blahaj.zone 6 points 1 day ago (1 children)

That card weighs nothing, it'll be fine without the bracket.

[–] deadbeef79000@lemmy.nz 1 points 20 hours ago (1 children)

The weight of the cable might be too much though.

[–] princessnorah@lemmy.blahaj.zone 2 points 19 hours ago

OP has said elsewhere that it'll be a headless install for rendering with Jellyfin.

[–] deadbeef79000@lemmy.nz 1 points 20 hours ago

Actually, yeah. That's the best of both worlds.

If you can crib some washers to pack the gap, you'll be fine.

[–] sunoc@sh.itjust.works 6 points 1 day ago (1 children)
[–] Diplomjodler3@lemmy.world 7 points 1 day ago (1 children)
[–] snoons@lemmy.ca 5 points 1 day ago

time for some wattle and daub