Hello all. Looking for some advice -
I recently built a new nas pc and migrated my zfs pool hoping it was as easy as importing it in the new install of truenas on the new pc.
I bought an LSI 9207-8i P20 hba that is attached to a PCIe lane and it shows up in truenas using lspci so its being detected . The seller said it was flashed to it mode but i havent been able to confirm yet.
From the same seller i also bought a mini-sas to sff 8482 splitter that i use to connect my disks. Sata power is supplied to the back of the connector via the psu.
In my previous build (Dell precision tower) the disks would show up and work but now,the disks are cold/silent. Theres no server parts per se in my new build, just consumer parts. Ive heard it can be the 3.3v power coming from one of the pins on sata connectors that can make disks not want to start. The disks are all wd/hgst ultrastar dc330 10tb drives. Ill get around to checking the model number when i get home to see if it might be that.. any other suggestions or am i out of luck ?
Appreciate any advice