I am using HP LTO-6 FC drive and this drive has an old firmare(J38S/EML FC). So I wanted to upgrade firmware to the latest one on HPE L&TT, but I couldn't download because I don't have support ticket.
I watched this link but there's no firmware for FC drives.
Is there any way to download my drive's latest firmware?
||
||
|Product ID : HP Ultrium 6-SCSI [FULL-HEIGHT]|
|||||Format : LTO-6 (w/r), LTO-5 (w/r), LTO-4 (r)|
|||||Firmware : J38S/EML FC (Ver 017.844, Date 2013/03/21-11:29)|
|||||Read/write calibration table version : DD1A|
|||||Phy config calibration table version : 1000|
|||||SKU number : Not available for this drive type|
|||||Serial number : |
|||||Type : Fibre Channel|
|||||OBDR : Not supported|
|||||WORM : Supported|
||||Interface|
|||||Drive Capability : Fibre Channel 8 Gbps|
|||Drive Health|
||||Drive|
|||||Device Analysis : Passed with Warnings|
||||||version: V27.08.2019|
||||||**Firmware rev J38S is out-of-date for Ultrium 6-SCSI as of Thu Jul 23 19:**00:00 2015; update to rev J5ES.|
||||||Rule 14.0 (Operating Temperature/Overtemp):|
||||||There are indications that the drive is operating too hot.|
||||||Please check that the airflow through the drive is adequate before attempting to re-use it.|
||||||Then run the LTO Cooling Check test.|
||||||Rule 16.0 (Head Selection Timeout/Old firmware):|