3DPrinting

19254 readers

107 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

[Ender 3 S1] Changing heatbreak PTFE (discuss.tchncs.de)

submitted 2 years ago by Flexaris@discuss.tchncs.de to c/3dprinting@lemmy.world

3 comments fedilink hide all child comments

I'm changing the PTFE in my heatbreak, I didn't realize these seem to be consumables. It started causing blockage.

A guy sent me a piece of PTFE from his Prusa MK3S+ that I could try as i was having trouble finding any PTFE quickly.

I realized I couldn't just cut a piece and put it in, that caused a lot of filament leakage and underextrusion. The end of the PTFE toward the nozzle was a bit jagged and I believe that's where the leakage happened. Now I'm wondering how the heatbreak and nozzle normally interface inside the heatblock, should they be touching? Should the PTFE protrude a bit from the heatbreak so there's a bit of pressure against the nozzle when I screw it in?

you are viewing a single comment's thread
view the rest of the comments

[–] MrSlicer@lemmy.world 3 points 2 years ago

When you order bowden tube it comes with a cutter. Make sure your fittings are tight.

But also heat up the hotend remove the nozzle and tube. Then push in through a piece of old bowden tube. This ensures there is no remaking plastic in the throat. Now reassemble. the old ptfe tu