3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
If it’s the standard hotend the tube touches the nozzle. It shouldn’t really be consumable but if you are printing at higher temps (i.e. over 220C or so) it can melt. If you are printing at those temps it’s worth swapping out for an all metal hotend.
It’s also really important to make sure the PTFE tube is cut really, really straight and even where it interfaces with the nozzle. I’m not sure if Enders come with a cutter but you can look up a Ptfe cutter online.
One more bit of advise is to use a high quality tubing like Capricorn PTFE since cheaper stuff can melt at lower temps.
Yeah I've been printing a little PETG at about 240, but it's something I rarely do so I haven't opted for a all metal hotend and as I understood it I thought it was okay until about 250 C, but I guess not. It's really mostly PLA that I print though.
I'll look for a PTFE cutter, thanks!