homeassistant

15814 readers

5 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Easiest way to create player targets for Music Assistant to connect to an active speaker via SPDIF for <$30 ? Squeezelite seems like a good candidate, but unsure how to connect to SPDIF (lemmy.nz)

submitted 1 year ago by sylverstream@lemmy.nz to c/homeassistant@lemmy.world

7 comments fedilink hide all child comments

I'm struggling to find the easiest solution to connect a set of active speakers that have BT/Optical (Toslink)/Coax. I currently use a tablet to stream Deezer via BT, but I want to be able to use them in Music Assistant. I tried Bubblepnp on the tablet, but it's too slow for that, it wasn't reliable.

I don't want to spend 100s of dollars on e.g. Sonos stuff. I see Squeezelite as a good option, but I'm unsure how to connect an SPDIF speaker. The docs say you can connect to one of the pins. Do I just cut the plug of an SPDIF cable and then connect to it?

I don't have a 3D printer, ideally I want a box around it.

Ideally there's an out-of-the-box solution. Any tips or help appreciated.

you are viewing a single comment's thread
view the rest of the comments

[–] sylverstream@lemmy.nz 4 points 1 year ago

Thanks for the long reply! I've tested Fully Kiosk again and now it seems to work perfectly. Previously it was not reliable, guess they have fixed it.