this post was submitted on 27 Apr 2024
26 points (96.4% liked)

homeassistant

15658 readers
62 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
 

Try as I might, due to the abundance of various types of low voltage wire connector types, I can't seem to find exactly what I'm looking for.

I do a lot of LED strips and DC powered automations and I've used many Wagos and soldered some stuff in place. These tend to have some problems though. Wagos can take up too much space, especially when connecting power to LED strips that can't be tucked away. Soldering in place sucks and usually ends with a poor connection. LED snap on clips are ridiculously unreliable and weak connections. Barrel connectors are nice and small but the connection has the potential to pull out.

The holy grail IMO would be a very small plastic two wire housing that can clip together like a plastic belt buckle or those connectors that often come with 12V DC batteries in battery backups/motorized kids toys. I have no idea what term to search for to find these.

Anybody got any hints?

I like the idea of presoldering these onto the ends of LED strips in lieu of barrel connectors, so once you are ready to install in the location it's as easy as snapping in place. If the LEDs burn out it can be replaced easily as well.

you are viewing a single comment's thread
view the rest of the comments
[–] brygphilomena@lemmy.world 3 points 1 year ago

There are inline screw terminal connectors. A quick Google of ch2 and ch3 connector will give you an idea.