this post was submitted on 30 Jan 2024
16 points (94.4% liked)

homeassistant

15759 readers
2 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
16
Does anyone know a way of calculating the energy needed to heat a home/room? (feddit.uk)
submitted 2 years ago by rmuk@feddit.uk to c/homeassistant@lemmy.world
20 comments fedilink hide all child comments
 

Does anyone know a way of calculating the amount of heating I need to maintain an average temperature in terms of kWh of heating per 24 hours? Ideally one taking into account weather conditions.

I have a pretty big Home Assistant setup which includes switches for individually controlling all the (electric) heaters in my home. I'm also using an electricity supplier that changes the amount they charge every 30 minutes to reflect supply and demand. Given these rates are published at least 24 hours in advance I can currently choose a number of hours to run the heaters per day and have an automation automatically select the cheapest periods. I'm paying less per kWh for heating than I would if I was using a gas boiler. Plus, it's all from renewables, so working out that number of hours is the next step.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] Starfighter@discuss.tchncs.de 3 points 2 years ago (1 children)

If you have such a system up and running already you could try to modify it before ripping it out and starting from scratch.

Borrowing an idea from the machine learning approach you could additionally take the difference in average outside temperature yesterday and the average forecasted outside temperature today. Then multiply that by a weight (the machine learning approach would find this value for you but a single weight can also be found by hand) and subtract it from the target temperature before the division step discussed previously. Effectively saying "you don't need to heat as much today since it will be a little warmer".

I fear that's about all you can do with this approach without massively overcomplicating things.

[โ€“] rmuk@feddit.uk 2 points 2 years ago

massively overcomplicating things

...you say? ๐Ÿค”