3DPrinting

19333 readers

14 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

Prusa MK4 vs Bambu P1S (lemmy.world)

submitted 2 years ago* (last edited 2 years ago) by root@lemmy.world to c/3dprinting@lemmy.world

29 comments fedilink hide all child comments

I'm looking to buy an intermediate level printer to upgrade from a MK2, and I'm deciding between a P1S vs a MK4.

I have never considered getting anything other than a Prusa, since I've had such good experiences using mine, however I heard that recently they've switched away from their open source model(?)

That and being made in the EU was the main differentiating factor for me, however I do hear really good things about Bambu printers.

Does anyone have experience with either?

Edit: Found a lot of the information I was looking for here: https://lemmy.world/post/9500502

you are viewing a single comment's thread
view the rest of the comments

[–] dual_sport_dork@lemmy.world 6 points 2 years ago

I would personally never buy a Bambu printer due to their closed source products and questionable cloud software design decisions. Plus the AMS is just irresponsibly stupid with the amount of filament waste it generates. Printing in multiple materials for pragmatic purposes is one thing... Assemblies with two types of plastic, dissolvable supports, that kind of stuff. But if you need your model to be multicolored, just friggin' paint it without spending more material on waste than made it into the model.

And if you don't want to overpay for a Prusa, check out the current gen 3 Qidi machines. I know I keep harping on them and I have no affiliation other than owning two myself (that I bought with my own money) but it has Bambu-like CoreXY performance at a fraction of the cost and the firmware is technically open source, running a modified version of Klipper.

The X-Plus 3 is comparable in raw performance with the Bambu P1S (minus the AMS capability) but is just shy of $100 cheaper, and has a build volume a couple of millimeters larger.