homeassistant

15727 readers

4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Home Assistant + OpenWRT + Pi-Hole on a Raspberry Pi 4 (lemmy.ca)

submitted 2 years ago by alwaysconfused@lemmy.ca to c/homeassistant@lemmy.world

11 comments fedilink hide all child comments

My current setup is a TP-Link wireless extender. From that I have my own little network that connects my computer, wireless devices and a Raspberry Pi 4. The RPi4 runs the Home Assistant OS for my small network of lights and switches. The TP-Link extender does not have enough memory to support OpenWRT which means I am dependent on the proprietary android app to configure it.

I thought I could use the integrations in HA to add OpenWRT and Pi-Hole but it looks like those integrations are for communicating with instances and devices not within the HA operating system.

What I was hoping to accomplish was to run HA, OpenWRT and Pi-Hole on the same RPi4 device and re-use the TP-Link extender elsewhere in the house to serve ad-blocked internet that extends beyond my little network of devices.

Would running multiple services like this be too demanding for the RPi4? And if it is possible, where is a good place to start?

you are viewing a single comment's thread
view the rest of the comments

[–] alwaysconfused@lemmy.ca 1 points 2 years ago

The actual router rented out by the service provider. I don't think they would be happy with me messing with their property.

I also lived somewhere else where I didn't have access to the main router so I use the extender as my personal network for file transfers, a few lights with a couple switches and my terrarium thermostat. If anything happens to the main router, I can just turn my extender into an access point and still have my personal network.

TP-Link requires an account to use my own extender which annoys me. Their app redirects my connection to my extender through their cloud service. It's not my VPN because I can still connect through the browser. Seems shadey and I don't like having the account already.