this post was submitted on 21 Sep 2023
30 points (96.9% liked)

homeassistant

15783 readers
1 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
30
Why shouldn't I use Reolink Cameras? (lemmy.today)
submitted 2 years ago by Buelldozer@lemmy.today to c/homeassistant@lemmy.world
17 comments fedilink hide all child comments
 

The next step in my HA journey is adding cameras; indoor, outdoor, and doorbell so I've been exploring my options. I had originally intended to do a Frigate setup, I even have a Coral module and PC to do it with, but then I discovered Reolink.

Without having any experience with them they look nearly ideal. They seem to have tight integration with HA 2023.3 or later and their pricing and functionality look good.

They seem like a no brainer but I've noticed that they're often NOT the first recommendation in the HA Community. Why is that and why shouldn't I use them?

you are viewing a single comment's thread
view the rest of the comments
[–] emuspawn@orbiting.observer 2 points 2 years ago* (last edited 2 years ago)

I'm running a few Reolink RLC-520A's on a separate VLAN with Frigate and Home Assistant - no GPU or Coral yet, just a CPU detector. It works pretty well! The reason they might not be the first choice is that YMMV with HA/Frigate compatibility based on which model you get, a little research must be done. Frigate has some specific settings to make the RTSP work better on the models that are functional.