721
this post was submitted on 05 Apr 2026
721 points (100.0% liked)
Steam Hardware
21706 readers
900 users here now
A place to discuss and support all Steam Hardware, including Steam Deck, Steam Machine, Steam Frame, and SteamOS in general.
As Lemmy doesn't have flairs yet, you can use these prefixes to indicate what type of post you have made, eg:
[Flair] My post title
The following is a list of suggested flairs:
[Deck] - Steam Deck related.
[Machine] - Steam Machine related.
[Frame] - Steam Frame related.
[Discussion] - General discussion.
[Help] - A request for help or support.
[News] - News about the deck.
[PSA] - Sharing important information.
[Game] - News / info about a game on the deck.
[Update] - An update to a previous post.
[Meta] - Discussion about this community.
If your post is only relevant to one hardware device (Deck/Machine/Frame/etc) please specify which one as part of the title or by using a device flair.
These are not enforced, but they are encouraged.
Rules:
- Follow the rules of Sopuli
- Posts must be related to Steam Hardware or Steam OS in an obvious way.
- No piracy, there are other communities for that.
- Discussion of emulators are allowed, but no discussion on how to illegally acquire ROMs.
- This is a place of civil discussion, no trolling.
- Have fun.
founded 4 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I didn't think Deck supported VRR? If you have VRR you just cap your frame rate at 37 FPS or whatever and the screen syncs to that and refreshes at 37 Hz. What you're describing sounds like old school vsync.
setsubyou got it more correct, my terminology is a bit off.
Yeah, you can lock the refresh rate at basically 15hz intervals (i think, last time i checked?), which is not true VRR, but, if you take the time to configure profiles and graphics settings per game, get stable and consistent frame rates, and then match the configurable refresh rate to that...
... this is sorta close to the ... idea/performance of what true VRR is going for, it just doesn't all work 'automagically'.
I have an OLED, not an LCD, so yeah it looks like the LCD tops out at 60hz.
So with an LCD, you could aim for basically 'always a bit above 30 fps' and then 60hz, for that 1:2 ratio, and with an OLED, aim for 'always a bit above 45 fps', and then 90hz, for the same 1:2 ratio.
Its not the same, of course, as actually having 60 or 90 fps, but, as long as your fps never dips below the screen refresh rate, it looks/feels smoother than doing a 30fps or 45fps traditional vsync.
But of course, you'll probably only need to do this for... significantly graphically heavy games... tons of less graphically intense / better optimized games will not need this level of tinkering min maxxing.
It doesn’t have VRR but it does have a configurable refresh rate. So e.g. if a game runs at a stable 40 fps you can run the display at 40 Hz too (or 80 Hz for the OLED model) and then you don’t get the uneven frame spacing you’d get from vsync with 40 fps on a 60 Hz display. With VRR the screen would also adjust to whatever frame rate the game produces even if it’s not stable, and the Deck doesn’t do that. But being able to get 40 fps with uniform frame timing instead of the 30 fps you’d have to use if the display was locked to 60 Hz (LCD model) or 90 Hz (OLED model) is a huge difference.