3DPrinting

22223 readers

241 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

Circles less circle-y (infosec.pub)

submitted 2 days ago* (last edited 1 day ago) by potate@lemmy.ca to c/3dprinting@lemmy.world

8 comments fedilink hide all child comments

I have an Ankermake M5 that I hadn't used in a while and recently got back to printing some stuff. I had a few prints come out well but then turned my extruder into a giant glob of melted plastic on an overnight print. I ended up just replacing the whole extruder as there's been some revisions and I figured it would be nice to upgrade, and replace the v-wheels and all that.

The new extruder initially had a ton of problems with stringing, but increasing retraction fixed it. The problem that I can't seem to figure out is curved surfaces are now sort of wavy. It's regular - turning into vertical peaks and valleys. I'm doing a print currently with the speed turned way down, but the issue persists.

Any ideas?

edit: After some trial and error, I figured out that it was a slicer issue. I was using the EufyMake slicer because that one can send jobs to the printer directly. When I resliced in Prussa, the issue disappeared.

you are viewing a single comment's thread
view the rest of the comments

[–] MxRemy@piefed.social 4 points 2 days ago

I doubt this is it, but it kinda looks like what happens when your slicer has arc welder turned on, but your printer firmware does not. You get a bunch of unrecognized G2/G3 commands flying by in the console, and curves get weirdddddd looking