3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
There's 3d printing as art, but then also 3d printing for utility. I use it primarily for the latter. For art I don't want AI generated junk, so filtering that is ok, but I usually won't like it if it's Ai generated and can pick it out anyway. I don't want barriers in Ai generated things like tool parts, shelf, etc. Though. All I care about there is quality. I want someone to have tested and reviewed it at least, but I'm not dogmatic at all about whether Ai produced it. I think the 3d printing community cares more about quality control on model libraries than just Ai gatekeeping.
Nearly every 3d print that has an AI generated tag also has no actual pictures of a printed part.
I think people just AI generate, than assume it's fine and post it, but never actually print it.
That's why I keep the "no AI" filter on, really cleans up the junk posts.
How I tried to get AI to generate an openscad file and it sucked.
There is a render. I assume if the algorithm is "smart" enough to create a mesh it can also evaluate the overhang angle at every given point. I suspect they do. But yes it's a good way of telling if anybody actually wanted to make this object or just habe a nice upload.
No, that's the problem. The algorithm is NOT good enough to determine if it is printable.
People assume this and upload tons of crap models.
Sorry but I can't believe that. The slicer itself can determine what overhang needs support so it's programmatically possible. Even if the AI hasn't been explicitly trained to do the same it would have scanned the code for slicera and "learned" (more like stole) it itself.
I am curious now. What is a state of the art AI tool to do stl? I think I will take a dive into this area