homeassistant

18363 readers

20 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Physical user interface (lemmy.world)

submitted 4 days ago by Test_Tickles@lemmy.world to c/homeassistant@lemmy.world

25 comments fedilink hide all child comments

I am fairly new to home automation and I am looking to add a few physical wall switches to devices that don't have a specific wall switch of their own. I have a couple rooms where I want to put a light on a smart bulb/plug/relay but want to be able to turn the light on/off via a physical interaction at the door, like a normal light switch.
The only solution I see right now is to expand the hole for the existing light (ceiling fan actually) switch, add another smart switch that doesn't actually have a load, and then set it up so if that switch is turned "on/off" then I have a automation that triggers the smart relay.
But that seems like gross overkill. I honestly don't care about cutting holes or wiring stuff up, but somehow paying full price for a smart switch and then using it as nothing more than an alternative user interface for yet another smart device seems really wrong.
Currently I have several kaso/tapo switches installed and have been looking at some smart relays/plugs/bulbs to turn on a lamp, or trigger the light on the fan separately from the fan itself.

you are viewing a single comment's thread
view the rest of the comments

[–] Chaser@lemmy.zip 2 points 2 days ago

Once I had a few door bell tasters from a custom pc build laying around. I drilled a small hole in closet next to my couch, put the taster in it, soldered it to a cheap esp, flashed tasmota on it and used it to trigger some automations. Nowadays I would use esphome.