Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com.
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !askusa@discuss.online
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
Ive done it with dozens of boards (not pc boards tho, but basically the same: processors, memories, capacitors and transistors... just less expandable and much more expensive), but I've used an ultrasonic cleaner, I'm not sure just letting it soak is going to do the trick. It could even make it worse, the ipa can dissolve the liquid-ish part of the gunk (oils) and leave the solid residue once dried. If you don't have such a machine, they're not that pricy but you'd need a fairly big one so not cheap either, my advise would be to use a toothbrush.
Some precautions: use 99.9% IPA, not any other alcohols and definitely not acetone. Take the whole thing apart. Take out any batteries off the boards. Most glues will be dissolved, which hasn't been a problem for me ever but if some of your parts aren't soldered, screwed, or fastened any other way they'll fall off. Let it dry very well, even help it a bit putting it in some warm place or using a hairdryer. As other have said thermal paste and pads will have to be replaced most likely. About the fans, I'm not sure, I've never done it. I've cleaned bigger motors, but those fans are cheaper to just replace than to service them unless it's a quick blowin' and dustin'.