3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
It looks to me that more is going on here than just how dry the filament is. I see a lot of deformity on the underside of overhang structures which makes me think that the temp is actually too high for the speed that your printing at. I would guess as the plastic went down it was curling edges upwards into the height of the next layer and eventually the nozzle hit this plastic that was too high causing some damage. What speed are you printing at ? Petg likes to print real slow in my experience. Like 20mm/s or less gives it more time to cool. I go as slow as 5-10mm/s when I'm using a large nozzle, but with a .04 you can go faster. Lowering the nozzle temp will reduce the puddling and curling up effect.
I don't dry filaments because I don't care that much about things being perfect. If my plastic is going down goopy, I just turn down the nozzle temp until it isn't... I've come to accept that things often print better if I set the print speeds to be slow. It gives the layers more time to cool before the nozzle comes back around.
All right, I think you are right on the curling upwards. I started another print, which is also using similar hexagonal sides, but is more massive - hexagons are larger, and walls are thicker. And it warps up visibly! When these overhanging arms on upper part of hexagons start printing, they just warp up while cooling. Then when nozzle comes back for the next layer, it hits the warped edges, pushing filament to the sides and making these artifacts. It didn't break any segments, as they are thicker, but I bet that's what happened in the original print.
On the new thicker print, the base of the model lifted up from the bed on one side at some point. I was watching the first two layers, so this happened some time later. Gonna try to slow down the print, lower nozzle temp a bit, bump up the bed temp a bit. Will see what happens.
Thanks for another interesting point. It is faster than you are suggesting. My slicer settings for "external perimeters" is 25 mm/s and for "perimeters" is 40 mm/s. There are no other type of movements on these hexagonal structures.
I may try slower printing at some point, but it's already a 7 hour print 😄