Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com.
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !askusa@discuss.online
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
My boss pushed us to research and acquire a resin printer a couple years ago. My coworker pushed the high-budget Form Labs direction due to his poor experience with resin printing in college. I had zero experience with resin (mostly only used Prusa FDM at that time) and pushed toward the relatively low budget Anycubic Photon direction, from the standpoint of "this is really not what we need to be doing with our budget, and this doesn't make sense for our use case, so I'll try to waste less money."
Now that my coworker's been gone for over a year, my boss thinks no one uses it because we don't know how. I know how, but FDM is just so much more approachable. I can swap filaments, click print, and walk away in about two minutes and trust that I'll come back to a usable part.
Changing out resin is its own special hell, and good luck if you have a print fail and have to clean off the bottom of the tray. I didn't get to a point of trusting prints to finish. Even when it does finish, you still have to wash and cure, and every part I ever made in resin seemed to be dimensionally unstable. Even the sample parts a Form Labs rep sent us were badly warped in shipping. The Photon hasn't been used in well over a year. CEO wants us to get rid of it, and I agree. Boss isn't letting go.
Meanwhile we just got two P2S printers that are cranking out parts like a champ. I would rather take a leisurely stroll across Eastern Ukraine than print with resin ever again.