Meshtastic

1442 readers

23 users here now

A community to discuss Meshtastic (https://meshtastic.org/docs/introduction)

founded 2 years ago

MODERATORS

Sal@mander.xyz

Newbie question - I would like to try Meshtastic (lemmy.zip)

submitted 3 days ago by fparri@lemmy.zip to c/meshtastic@mander.xyz

8 comments fedilink hide all child comments

Do you have any recommendations for a cheap Meshtastic-compatible board? I don’t need GPS or a battery, since I’ll power it with a solar panel or a power bank. Having a case isn’t important; what really matters is avoiding any soldering.

I’m basically looking for a low-cost board with an integrated LoRa antenna. The goal is just to experiment, connecting it via Bluetooth to a PC or smartphone.

you are viewing a single comment's thread
view the rest of the comments

[–] 3holly3@lemmy.dbzer0.com 4 points 3 days ago (1 children)

The Heltec V3 is more or less the cheapest simplest entry into mesh radio. You may have to plug in an ipex connector but no soldering. They can be found packaged with a very basic case (so you’re not handling the raw pcb) and an antenna for 20-30 $US. If you want to spend a little extra and be able to play with the gps features in MT, the Heltec T114 V2 is great and equally simple to set up. That’s what I started with and glad I did. Have fun!

[–] hereiamagain@sh.itjust.works 2 points 3 days ago

V3 is esp32, bad for solar unfortunately