3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
Addendum: If nozzles are cheap, you could pick some up. They are consumable parts.
And you could grab a tighter nozzle too, for better details in your prints. (Though the print time goes up dramatically!)
or just buy a proper nozzle with a tungsten or ruby tip.
How frequently would I need to replace a nozzle?
Not often, if you're running non-fiber reinforced filaments. even standard brass nozzles can get 1000 hours on them before you start to get loss of print quality. And hardened nozzles have practically infinite life in normal plastic.
Better off getting multiple sizes though. A default 0.4mm nozzle is a nice middle ground. 0.2mm gains a ton of detail for small parts. 0.6 and 0.8mm nozzles can drasticall ly reduce print times for large parts and creates better overhang/bridge surfaces.
All true, but sometimes a clog turns into a Clog and it’s time to just drop in a replacement while you try and fix the clogged one.
Got it, thank you