this post was submitted on 31 Oct 2025
47 points (91.2% liked)
Videos
16936 readers
210 users here now
For sharing interesting videos from around the Web!
Rules
- Videos only
- Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
- Don't be a jerk
- No advertising
- No political videos, post those to !politicalvideos@lemmy.world instead.
- Avoid clickbait titles. (Tip: Use dearrow)
- Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
- Duplicate posts may be removed
- AI generated content must be tagged with "[AI] …" ^Discussion^
Note: bans may apply to both !videos@lemmy.world and !politicalvideos@lemmy.world
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Europeans: Pathetic.
/j
Ah, but can you phase-multiply 120v+- into a 240v feed from the breaker? Checkmate, firestarter!
I always wondered how that works? Do you have phases 180° against each other? Our (Europe) phases are at a 60° angle to each other, so while one phase is 230v, two phase is 400v.
edit: re-reading, it should be 120°, not 60.
My understanding is commercial/industrial service is normally 3-phase but residential service is typically only single-phase. Wikipedia says that gets supplied as two 120V AC lines that are 180° out of phase with each other along with a shared neutral.
I'm no electrician, but my understanding is that the phase of 120v has two opposite polarities, given the way AC power works. By pairing up two powerlines that are out of phase, you're getting 120v on the positive and 120v on the negative, which doubles the capacity along the parallel line. If you did this with a 110v half-line like the UK has, it increases the Amperage to an unsustainable level, while the US standard does not stress the line in the 240v configuration specifically because neither phase causes the other interference.
I normally don't say this, but don't trust my assessment. Google will be more accurate.
At least I'll heat my home!