techsupport

2981 readers

1 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Software gore

Recommendations

founded 2 years ago

MODERATORS

GatoB@lemmy.world

What is this connector? (infosec.pub)

submitted 2 weeks ago* (last edited 2 weeks ago) by Fortatech@gregtech.eu to c/techsupport@lemmy.world

61 comments fedilink hide all child comments

I have recently taken apart some old PCs and found an HDD that uses this cable, but my motherboard doesn't seem to have a connector. Is there a way to connect this to SATA or PCIE?

edit: hdd, not ssd

you are viewing a single comment's thread
view the rest of the comments

[–] Fortatech@gregtech.eu 2 points 2 weeks ago (1 children)

So like... What does the jumper do?

[–] mlg@lemmy.world 4 points 2 weeks ago* (last edited 2 weeks ago)

Many IDE cables used to come with 2-4+ daisy chained connectors allowing you to plug in multiple drives into a single cable on a single IDE bus.

This meant that you had to ensure any downstream HDDs would be configured as slaves to show up properly to the system.

You could either do this manually by setting the jumper to slave (usually just removing it) or setting the jumper to cable select which would automatically configure master slave drives for you.

Example for a Seagate drive:

In your case, you could either use the master select or cable select and it wouldn't matter since you only have one drive.