3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
No one has said it yet, but the most common cause of a breaker being thrown is an overload or a short. It looks like you've determined it isn't an overload since it happens when the device isn't turned on. That indicates that you may have a short. The two likely places are the PSU (since it's supposed to be turned off) and the cord (since the PSU wouldn't matter). If the cord is replaceable, I'd try that first. After the cord I'd see about replacing the PSU. Hopefully it's a standard part and not something you have to buy from Ender if they still carry it. Another thing to check is if it's the outlet. If you try it on a different outlet and get the same problem, it is likely the device.
The cable is an interesting point, as I haven't tried a different cable. Since there's a non-zero chance that it could be responsible, I'll try switching it next time I plug it in. I suppose the cable they shipped me could be bad.