3DPrinting

19719 readers

125 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

Ender 3 V2 Causing Circuit Breaker to Trip (Even when PSU is flipped off!) (lemmy.zip)

submitted 1 day ago by MoogleMaestro@lemmy.zip to c/3dprinting@lemmy.world

17 comments fedilink hide all child comments

I'm having a rather strange problem with my Ender 3 V2 that's causing me to leave it unplugged and as a result underused.

I used to have my printer set up in my garage but one day noticed that the circuit breaker was tripping overnight resulting my refridgerator to turn off (not ideal.) I kept removing devices until I determined that it was caused by my 3d printer despite the PSU being completely flipped off at the back! This is obviously strange behavior and not ideal for a device that is outside of it's warranty period.

So I'm not sure how to proceed here. Firstly, what type of issue would cause this device to trigger a circuit breaker even when the PSU is turned off? Secondly, is there some way to fix this device that isn't a major PITA? Has anyone else experienced this as well?

you are viewing a single comment's thread
view the rest of the comments

[–] QuarterSwede@lemmy.world 3 points 1 day ago* (last edited 1 day ago)

If it’s not a GFCI or AFCI protected circuit then it has to be overcurrent or a bad breaker (they do stop being able to hold over time).

For overcurrent, something isn’t right with your PSU and it’s drawing more than 15 amps or 20 amps if yours is in the kitchen.

For a bad breaker, put your printer on a different circuit and see if it continues to trip. If not, swap the offending breaker out. Pretty safe to do yourself if you don’t touch the bus bar behind the breakers (otherwise it WILL kill you).