Bicycles

5689 readers

11 users here now

Welcome to !bicycles@lemmy.ca

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!

Community Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia.
Be respectful. Everyone should feel welcome here.
No porn.
No ads / spamming.
Ride bikes

Other cycling-related communities

founded 2 years ago

MODERATORS

Evkob@lemmy.ca

Swapping brakes and levers (infosec.pub)

submitted 7 months ago* (last edited 7 months ago) by computersandblues@post.lurk.org to c/bicycles@lemmy.ca

6 comments fedilink hide all child comments

Swapping brakes and levers

@bicycles

I have a randonneur bike from the 1980ies which still has many of the original parts. As far as i can tell it still has the original calipers and brake levers (shimano 600 ex or something similar, with cel 60 levers that go perpendicular in front of the handlebar; the caliper just says dia compe, it might be a dia compe gran compe 400). The brake shoes have been changed of course, but still the brakes are not very good. Trying to adjust the bowden cables didn't change much.

I'd like to take the bike for a tour across the alps, and am trying to figure out how to improve the brakes for it to feel safe. Does it make sense to change them completely, or should they still do their job well if set up correctly? If they should be changed, what do I need to consider when changing them? Since they are screwed onto the handlebar, would any modern break lever fit? What kind of brake should I get for a good improvement in brake strength if I don't want to go for disc brakes?

#cycling #bicycles #bicycling

you are viewing a single comment's thread
view the rest of the comments

[–] adamrice@c.im 7 points 7 months ago (1 children)

@computersandblues @bicycles Sidepulls got a lot better in the late 1990s with the advent of dual-pivot brakes. You can also get beefier brakes so that less of your braking force goes into bending the brake arms.

Your brake levers are not screwed onto the handlebar. They have a band clamp holding them in place. Levers are interchangeable.

You couldn’t put disc brakes on this bike even if you wanted to, short of breaking out a welding torch to modify the frame.

These brakes aren’t cheap, but they’d probably work for you. https://velo-orange.com/collections/brakes/products/grand-cru-long-reach-brakes

[–] Dayroom7485@lemmy.world 1 points 7 months ago

@adamrice@c.im‘s advice is excellent, came here to recommend a cheap alternative: get yourself used shimano breaks from the 90s off of ebay.

These for example will brake better than the brakes you have installed on your bike and cost EUR 37. Search for Shimano 600.