Woodworking

7728 readers

2 users here now

A handmade home for woodworkers and admirers of woodworkers. Our community icon is submitted by @1985MustangCobra@lemmy.ca whose father was inspired to start woodworking by Norm and the New Yankee Workshop.

founded 2 years ago

MODERATORS

NataliePortland@lemmy.ca

captain_aggravated@sh.itjust.works

112

City Council decided to cut down a 20 y/o tree in front of the shop i work at, and i got this slab as a memento, what is the process of turning this into chopping board? (infosec.pub)

submitted 4 days ago by psx_crab@lemmy.zip to c/woodworking@lemmy.ca

21 comments fedilink hide all child comments

Or at least, a side table. What is the process of doing that? I have basic hand tool for working on some other small project, a small circular saw(that attached to a marble cutter), and an electric planer, what else would i need?

you are viewing a single comment's thread
view the rest of the comments

[–] psx_crab@lemmy.zip 3 points 3 days ago (1 children)

My plan is to use the electric planer and slowly work to flatten it, but router seems like a more viable way to do it. Maybe i'll get one once the wood dried...in a year or so.

[–] LastYearsIrritant@sopuli.xyz 3 points 3 days ago (1 children)

By electric planer, do you mean a handheld planer, or a pass through planer? If you mean the pass through kind, then that's probably fine, but you might have a problem with it taking chunks off the edges, due to the orientation of the grain.

If you are just doing a single slab, building and setting up a router sled is more work than doing it with a hand plane, manual or electric. So I would go that route if possible.

That being said, it's going to crack as it dries unless you cut it before it starts shrinking.

[–] psx_crab@lemmy.zip 1 points 3 days ago

Hand electric planer like the other user posted.

That being said, it's going to crack as it dries unless you cut it before it starts shrinking.

Where should i cut it to prevent that?