3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
I'm still trying to get the hang of that sort of fit. I saw it in a video about crush ribs but it didn't work when I tried it. Will keep at it until I figure it out, though.
Just do small test prints first. For a table saw feather board in PLA this worked but it is length and material dependant.
Calipers are consistent for the 2.6mm but too dead of a battery to charge the capacitive sensor past around 50mm so the scale shows ~63mm long. I think the optimum angle is around 30° but don't quote me. I just imported an image of another feather board and used it to get basic working dimensions. You only need to know 1 measurement in a flat image in CAD to calibrate the size for use in the background to draw your sketches on top of. With a table saw feather board, you know the slot dimensions. You could easily screenshot the video's sketch of the feather pattern here, import that and make a copy at any scale in FreeCAD. Mango Jelly has YT vids about this if you need them.