3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
Assume you tried unraveling to deeper layers? If it's brittle beyond the surface layer in the spool I think it's toast. Would be interested to hear the trick if I'm wrong.
There's probably only 150g or less on the spool so I did not unravel it. After the 12 hour bake I gave the very end a bend and it snapped like a twig. It's running at 55c and 15% humidity right now so here's hoping. If it's screwed it's not the worst thing ever, but I have nearly 1kg left of old ABS as well and I would be sad if I couldn't save it.
A trick is to weigh the filament before you start drying it and then weigh it again every few hours to see if it's stopped getting lighter. If it's been hours since it lost a single gram, then it's probably close enough to as dry as it's going to get, and if it still doesn't behave, then there must be a second problem.