this post was submitted on 30 Jun 2025
3 points (100.0% liked)
AusRenovation
229 readers
1 users here now
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
It's the kitchen floor (basement brewery ceiling) - under cabinets, when we redo the kitchen we're gonna patch the floorboards
If it's still under a cabinet for the moment then I'd be just ignoring it until you're up to renovating the kitchen. I wouldn't even bother adding extra covering unless you're either storing stuff in there that will scratch into the fibro or want to avoid small things getting wedged in the holes.
Ok. I see the misunderstanding.
The basement brewery is below the kitchen. We know for a fact the kitchen subfloor under the tiles is asbestos hardiboard, that's what's visible through the holes. Obviously we don't want it shedding in the beer, so we're approaching it from the brewery side.
Ah, now it's all coming together...
In that case spraying a bit of paint will help stick the fibres down in those spots, but if the chance of shedding there is a concern then you're probably better off covering the whole area to avoid anything working through the joints/cracks in the boards. I'd consider it a low risk even uncovered but I can understand wanting a bit more peace of mind for this.
Something I'm now thinking could be an option for you would be to cover the ceiling with those foam/foil insulating panels (like this). They're light enough to stick to the ceiling with minimal fixings, would act as a decent barrier (particularly with the joints sealed with tape) and you get a bit of extra insulation as a side benefit.
Yah, we're considering some panels - they're light and cheap enough at Bunnings, hubs is kinda in love with the dark wood look though. Trying to convince him he needs panels at least over the workspace...