this post was submitted on 05 Feb 2025
14 points (88.9% liked)
homeassistant
15670 readers
113 users here now
Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.
Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation
Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Why the
float + 1
for some values? Also you're using<
, maybe try<=
I was young and... I don't know why I used it a few years ago. I will try your suggestion.
Ok, now I know why. without the +1 the automation does not trigger when the temperature is over the target and the TRVs running on idle. The +1 triggers the automation and switches them off until the room temperature is under the target temperature. So it does not explain why the mode is switched from heat to off or the other way around in the target +1° range.