homeassistant

19098 readers

1 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

356

Only Sensor (5, 4, 8-AQ, and 2-TH): The only DIY home automation sensor you'll ever need (infosec.pub)

submitted 1 year ago by fmstrat@lemmy.nowsci.com to c/homeassistant@lemmy.world

32 comments fedilink hide all child comments

Hey all,

A couple of weeks ago I posted my 3D printable pegboard organizers, and today I’m releasing the Only Sensor line of home automation sensors.

Fully free and open, complete with wiring diagrams, cases, component bill of materials, and instructions for assembly.

You source and build them yourself, with acquisition costs ranging from $2-$35 to build, and options for:

mmWave presence
PIR motion detection
Temperature
Humidity
LUX
PM <10µm AQI
PM <2.5µm AQI
PM <1µm AQI
NOX
VOC

All integrate with Home Assistant via ESPHome.

All the details can be found at: https://nowsci.com/only-sensor/

you are viewing a single comment's thread
view the rest of the comments

[–] 31337@sh.itjust.works 4 points 1 year ago

Cool. A few years ago I made similar sensors (but just PIR, LUX, esp8266 board, jumper wires, and some with ultrasonic proximity). Attached them to the wall with those 3m velcro things. ESPHome makes things so easy; didn't even have to write code. Hardest thing was designing and iterating over the case to get the tolerances just right.