homeassistant

15814 readers

5 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

WLED power limit for FCOB strip (lemmy.world)

submitted 9 months ago by ApplyingAutomation@lemmy.world to c/homeassistant@lemmy.world

10 comments fedilink hide all child comments

Pardon a WLED question in the Home Assistant community, but I was unable to find a WLED community in the fediverse.

Regardless, I have this 720 LED/meter FCOB strip, which is 24v strip & I'm trying to figure out what to configure the "LED voltage (Max. current for a single LED):"

Since it's a 20IC per meter & they claim 21watts per meter that comes out to ~1w per IC. But I'm unsure how that converts to mA like WLED is asking for.

Any advice would be greatly appreciated 🤠

you are viewing a single comment's thread
view the rest of the comments

[–] Tolookah@discuss.tchncs.de 2 points 9 months ago

It's near the current limiter setting, it's in 0.14.0-0.14.4 at least (Sample size two boards, one that needs updating). It's how wled estimates how much current each LED takes