homeassistant

15670 readers

89 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Problem with Rheem Econet integration (lemmy.world)

submitted 10 months ago by chockblock@lemmy.world to c/homeassistant@lemmy.world

5 comments fedilink hide all child comments

Is anyone else having issues with the Rheem Econet integration? It worked so well for so long but now it spends most of its time disconnected from Econet. It appears to reconnect every few minutes for a bit but it seems like every time I open the home assistant app, my thermostat is not functioning. The actual thermostat in my house is functioning normally and connected to the network.

Do you guys have any suggestions?

you are viewing a single comment's thread
view the rest of the comments

[–] colebrodine@midwest.social 1 points 9 months ago (1 children)

Finally getting back to this. I only recently discovered I can use the diagnostics port to try and control it directly. I'm probably going to attempt that but need to get some hardware.

I still don't seem to have any issues with connecting or disconnecting.

[–] colebrodine@midwest.social 1 points 8 months ago

I ordered the stuff and setup the ESPHome-Econet solution. It works really well! I actually deleted the Rheem integration just now because the ESPHome solution is so much better. It was cheap and easy to setup too. I spent about $25 US buying the parts from Mouser. (I used an old phone cable, so I didn't have to buy that)