Home Assistant

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/justwantv on 2025-05-24 02:57:46+00:00.

Some audio sub would just muck this up… What all speakers or music services are you guys using. We have a mix of Echo Shows and Dots scattered around 5 in total. And one dot plugged into a 20 year old Sony 6.1 receiver tossed high on a shelf in the Laundry room that powers two outdoor pioneers speakers. I Call em’…”The Doggs” lol. Seriously that Sony is a 600 watt power killer I see as the weakest link that needs something much more efficient.

Then all our tvs are Roku. Which I can control simple things like volume pause etc with Alexa.

I like how I can play Amazon music on all the devices. But is this the best for playing sounds triggered by automations? Or is there some better way I can connect sound and music to HA.

I don’t have unlimited budget but what is something you use or something I can build on.

What are you running and why do you like it.

P.s. the number one factor is connectivity for me over sound quality to an extent. Also I don’t care about local vs hosted. That takes a back seat to connectivity also.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/sessho86 on 2025-05-23 21:55:03+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/vFabifourtwenty on 2025-05-23 15:47:31+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/jstimu on 2025-05-23 11:29:06+00:00.

https://preview.redd.it/axk7jl8eoi2f1.png?width=1920&format=png&auto=webp&s=a0920d046022ceb21877daf125fa4129bd15cbaa

These are the cards completed so far and working on some more cards, If you have any suggestion let me know..

Any feedback will be appreciated

Thanks

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/Kat81inTX on 2025-05-22 22:00:09+00:00.

As someone who worked in the semiconductor industry for 30+ years, including a lot of work on SoC thermal management, I'm a bit embarrassed to say that I trusted a vendor to sell me a properly designed Raspberry Pi 4 kit back in 2021.

I should have paid more attention, as it took me almost 4 years to notice the processor has been running way too hot.

Here's the CanaKit package I bought: https://imgur.com/M9OdLJc

Note that heat sinks were included, but no fan. I really should have been suspicious of a case with no air venting, but I'd deployed many RPi 1, 2 and 3 kits in similar cases with no problems. Of course, they weren't running multi-core CPUs at 1.2 GHz.

Recently while tuning the system, I installed Glances and was surprised the processor temp was hovering around 80°C with fairly low processor load. The top of the case never felt too warm, which should have tipped me off that the CPU heat was not being dissipated efficiently.

I popped the top off of the CanaKit case and enabled the System Monitor Processor Temperature sensor to observe the temp for a few hours ... it dropped to around 70°C almost immediately ... still too high, in my opinion.

A quick search on Amazon found a cheap fan-less aluminum heat sink case: https://a.co/d/dQ9Oev8

Moving the RPi 4 to that case dropped the temp to around 55°C under a typical load for my setup: https://imgur.com/ZysJrRt

If you're running an older Pi 4, you might want to check your processor temp to see if a cheap case upgrade will help you.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/bultodepapas on 2025-05-23 02:48:23+00:00.

For two years, ZHA worked perfectly in my setup. I’m running Home Assistant with multiple Zigbee, all evenly distributed throughout a two-story house. Everything was fast, responsive, and rock-solid — even during power outages, the network would recover seamlessly. I never had a single issue.

But recently, something changed — maybe an update, I’m not sure. Now, about half of my devices either don’t connect, drop off randomly, or behave inconsistently. Rebinding doesn’t help. Power-cycling coordinators or endpoints does nothing. I’ve tried all the usual troubleshooting steps, but the problems persist. Some devices work intermittently, others not at all.

It’s driving me crazy. I used to love Zigbee and ZHA because it just worked. Now I’m constantly chasing ghosts. Anyone else experiencing this? Any ideas?

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/nokerb on 2025-05-23 01:41:41+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/SLR_Winter on 2025-05-22 21:06:38+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/cdemi on 2025-05-22 19:25:20+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/portalqubes on 2025-05-22 14:05:52+00:00.

Or most complicated*

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/NoodleCheeseThief on 2025-05-22 13:59:58+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/marcinbauer-me on 2025-05-22 07:02:23+00:00.

Hello to you all!

Marcin here again, product designer from the Open Home Foundation, working on Home Assistant.

This time, I'd like to invite you to participate in a card sorting test focused on making navigating Home Assistant settings easier and faster.

This is a fully remote and unmoderated test, which means you can complete it independently, at your own pace, and whenever it's convenient for you. It should take about 15-20 minutes to complete.

To participate, follow this link:

https://usabi.li/do/eb0dubhtcqau/swhkz0 🎉 🙂

If you have any questions or encounter any issues, feel free to comment below or reach out directly.

**Browser Compatibility Notice:** For the best experience while taking the test, we ask you to use a desktop or laptop computer. In past tests, some of you ran into issues accessing the test because of certain browser checks our software has in place. Unfortunately, we can't fix those problems right now. But no worries—you can easily access the test using Chrome, Firefox, or Safari!

Thank you for helping us make Home Assistant even better!

Cheers 👋

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/Swollef on 2025-05-22 10:10:06+00:00.

I've been a home assistant users for the last 5-6 years, ive slowly added and upgraded my system to a point where im very happy with it but most of all its been incredibly stable (HA on proxmox with a UPS).

I'm about to move in to a new house that requires a full rewire (among other things), this seems like my chance to get everything permanently wired in for HA, not just smart plugs and shelly devices behind the switches.

one of my major worries is that HA or the Wi-Fi goes down leaving me little control over the house.

my initial thought was to setup shelly din rail devices with shelly I4 devices for light switches, the problem here is that I have to above problem that if the Wi-Fi drops out or HA goes down I've literally zero control of lighting. the other alternative is I wire it traditionally and have switches on the relays too, this seems somewhat backwards in my head in 2025, but maybe a necessity, but does remove the need for the i4 devices.

the other option seems to be KNX, which I know nothing about but have started their ecampus learning course. looking at prices, I could order an awful lot of shelly devices for the price of a single KNX actuator.

if you where rewiring a home with the intention of it being a smart home, what underlying technology would you use to run your smart home (obviously it should integrate well with HA)?

Edit to add: I'm in the UK

Edit 2: Wow thanks for the responses and the comments on individual hardware pieces, by the sounds of it, KNX is exactly what im looking for, I'll start doing my research now :)

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/EmeraldLapras on 2025-05-22 00:59:11+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/MattTelles7 on 2025-05-21 16:00:12+00:00.

Both Cloudflare tunnel and Nabu Casa expose the login page to the public internet. However, people seem to keep telling me that I shouldn’t use Cloudflare because it exposes the login screen to the internet. Yet so does Nabu…

I’m confused, I don’t know much about networking, but I’d like to have my stuff accessible to devices that can’t use a VPN. Can anyone give me a clear explanation as to why one is more secure than the other and why I shouldn’t use Cloudflare? Or maybe I can use Cloudflare proxy but with other security measures?

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/macbag on 2025-05-21 15:22:25+00:00.

I’ve got a Lenovo Tab mounted on the wall running my Home Assistant dashboard (through Fully Kiosk). What’s the simplest way to play a local mp3 file (like a doorbell sound) directly on the tablet?

Tried using media_player.play_media , browser mode, music assistant but couldn’t get it to work.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/CHRISTIVVN on 2025-05-21 21:33:33+00:00.

What are some of the uses you guys use for smart plugs? Energy monitoring? Automations?

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/YogurtclosetGlad9512 on 2025-05-21 10:33:42+00:00.

Hey everyone!

I've been lurking in this community for a while and noticed several posts about DIY displays and voice assistants. I'm thinking about hacking together a smart display device that would combine:

• Digital family calendar (Cozi-style)

• Home Assistant integration

• Voice control

• AI for managing schedules and reminders

• A nice-looking design (tired of taped-together solutions!)

Basically, I want something that sits on my kitchen counter that my whole family can use to check schedules, control the house, and manage our chaos - all while looking decent enough that it doesn't scream "weekend project."

I'm a tinkerer/developer with some hardware experience and I'm thinking of building a prototype. Before I dive in too deep - is this something others would find useful, or am I solving a problem only I have?

What features would make this a must-have for your home? Any suggestions or ideas?

Thanks!

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/bob23131 on 2025-05-21 18:29:49+00:00.

Hey all,

I've dabbled in Energy Monitoring for awhile and seen many new low priced energy monitors listed on Amazon (Refoss, Fusion Energy, etc).

A lot of these systems aren't using components that have proper safety certificaitons. I'm surprised some electricians will even touch these things. Heck, they're technically "not allowed" to be sold in Amazon US/CA due to missing certifications.

There's a reason why monitors like Emporia Energy cost a bit more. All components used in their systems have proper safety listings. They're allowed to be installed within the panel.

Using systems like Refoss and Fusion Energy violates electrical code in US/Canada and if you ever have a house fire/etc. good luck making an insurance claim.

In EU I think the equivalent is CE listing, but be careful there too. There's a ton of Chinese products that come with a "China Export" (edit: doesn't mean China Export, should check all CE variants) logo that looks very similar to a CE listing. The C and E should be full circles.

Anyway, hopefully this advice saves someone some future headache.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/BazimQQ on 2025-05-21 14:31:55+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/Dear_Emergency_206 on 2025-05-21 14:03:18+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/Revolutionary_Bed431 on 2025-05-21 16:26:06+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/emikogonebad on 2025-05-21 07:17:27+00:00.

Hi everyone! 😊

I’m trying to surprise my husband with a mini pc for his Home Assistant setup. He’s using a Synology machine now but has mentioned raspberry pie.

I’ve been reading Reddit but honestly, most of it is way over my head 😅

He automated all our lights, curtain, camera, and I guess other stuff? I feel he automated too much though and am afraid nothing will work anymore once internet goes out..

What would you buy if you were me? Appreciate the help! 🙏

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/Quintaar on 2025-05-21 07:52:46+00:00.

This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/SendMeANicePM on 2025-05-21 00:54:44+00:00.

I've just received my HA Green and I'm learning along the way. I discovered today that besides setting up my dashboard and integrating everything, I can do things like notify me what train is going past my house, or what plane it is that I can hear overhead.

These won't contribute anything to me but satisfy curiosities. What integrations etc do you have just for the sake of your own interest? I'm looking for inspiration.